|
|
|
| Heat exchanger |
|
Heat exchanger c/58 brand cards with 2 entry APV ¨
measuring 25 cm width/85 cm long. |
Brand:
APV
|
|
|
Main applications:
Manufacture of dairy area, milk
|
|
Main suggestions:
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: West equipamentos
Plate heat exchanger.
Manufacturer / brand: West.
Model: West-15.
Composed of a solid stainless steel pedestal, corrugated plates, tie rods for fixing the plate bundle.
Approximate capacity: from 2,000 liters per hour to 10,000 liters per... |
|
|
 |
Brand: MCI
Helical gas heat exchanger.
Brand: MCI.
Voltage: 230V ~ 50Hz.
The equipment served the continuous deep fryer for frozen snacks (Multifry - capacity 300 kg/hour).... |
|
|
 |
Heat exchanger with 26 plates.
Length 0,93 m x 0,41 m width x 0,74 m height.... |
|
|
 |
Heat exchanger with 2 stages and 17 plates
0.75 0.90 Height x length... |
|
|
 |
Brand: APV
2-stage heat exchanger plates 0.84 mm height 41.... |
|
|
 |
Double heat exchanger.
With 48 plates being 4 x 12.
Measures 1,50 x 1,30 mm.
Plate Information:
PMTA 6 Bar.
Design temperature: 120 C.
Pressure test design: 677.8 bar.
Thermal exchange area: 1.2 m³.
Tightening of the set of mi... |
|
|
 |
Stainless steel jacketed tank.
With heat exchanger and centrifugal pump.... |
|
|
 |
Brand: GEA
Heat exchanger for oil cooling.
Manufacturer/brand: GEA do Brasil.
Year of manufacture: 1998.
Stoppage time: 10 years. Operating time: 16 years.
The heat exchanger is a piece of equipment used for heating and cooling gases, oils, water an... |
|
|
 |
Heat exchanger for 2 stages with 12 plates.
Height 0.76 m x length 0.87 m x width 0.41 m.... |
|
|
 |
Tubular heat exchanger for soda with temperature between 60 and 80 degrees, 10000 l/h flow rate... |
|
|
 |
Shell and tube condenser/hull heat exchanger.
Diameter: 350 mm.
Total length: 3000 mm.
Length without covers: 2500 mm.
56 inner tubes as per photo.
Tube inner diameter: 10 mm.
It had a juice system.... |
|
|
 |
Brand: Tetra Pak
UHT VTIS for sterilizing dairy products.
Aseptic processing system for sterilizing heat-sensitive and low-acid products such as milk, enriched milk, cream, soy milk, formulated dairy products, ice cream mixes, dairy desserts, as well as ESL (exten... |
|
|
 |
Brand: R.Camargo
Line for production of ice cream of pasta.
Composed by:
Producer of horizontal ice cream.
Brand: R.Camargo.
Model: PHD 80/100.
Capacity: 80 L / 100 L / h.
Tub of autonomous maturation.
Brand: R.Camargo.
Capacity: 180 L.
Hom... |
|
|
 |
Pasteurization or maturation system with 2 vats of 600 liters each.
Stainless steel tanks.
Sanitary pump for product pumping.
Plate heat exchanger in stainless steel.
Cooling tower.
Producer of ice cream.
Complete system assembled.
... |
|
|
 |
Brand: Apema, MECALOR, Sabroe
Components: WEG
Compressor for ammonia.
Manufacturer: Sabroe.
Model: CMO 16.
Working pressure: maximum 15 atm.
Engine: WEG 40 HP.
Apema condenser.
Model: SL - 30.
Capacity: 30 TR.... |
|
|
 |
Brand: TecnoClima
Canning line for carbonated and non-carbonated beverages.
For 269 ml, 350 ml, 355 ml and 473 ml cans.
Composed of:
- Carbonator with tank pump and heat exchanger.
Approximate capacity: up to 3,000 liters per hour.
- Stainless steel thr... |
|
|
 |
Tilting mixer with conical bottom in stainless steel.
With carbon steel structure.
With heat exchanger.
It was used in the dairy food processing industry.... |
|
|
 |
Brand: Innova Inox
Stainless steel skid-mounted pasteurizer for pasteurizing liquids, such as milk and juices.
Manufacturer | Brand: Innova Inox | Innova Industrial Equipment Ltda.
Model: PTP-2000L.
Approximate capacity: up to 2,000 liters per hour.
Year of... |
|
|
 |
Brand: Alfa Laval, APV, Endress Hauser, Endress+Hauser, Loma Systems, NASH, SMAR
Automated system for preserving the integrity of products with chunks.
Set of industrial equipment for food processing, specifically designed to produce items with solid chunks that do not break down during the process.
Approximate capacity: 45... |
|
|
 |
Brand: Narita, VMC Máquinas
Complete line for bottling mineral water, carbonated or still drinks.
Manufacturer | Brand: VMC Máquinas.
For 500 ml bottles.*
*Can be used for up to 2 liters.
Composed of:
- Inlet air vents that leave the blower* and go to the filler.... |
|
|
 |
Brand: Tetra Pak
Indirect tubular pasteurizer sterilizer, aseptic line.
Manufacturer | Brand: Tetra Pak.
Approximate capacity: up to 9,000 liters per hour.
With THE Tetra Pak Spiraflo tubular heat exchanger.
Refurbished equipment.
Includes new componen... |
|
|
 |
Brand: Ziemann Liess, APV, Cleaver-Brooks, Filtec, Ingersoll Rand, KHS, STEINECKER
Complete Brewery Factory.
Approximate capacity: up to 10,000 bottles/hour for 600 ml bottles.
Equipment set for malt and gritz treatment, consisting of:
- Reception, cleaning and weighing.
Manufacturer | brand: ZIEMANN LIESS (Brazil).
... |
|
|
 |
Brand: Milainox
Non-carbonated beverage filling line.
Composed by:
Plate pasteurizer.
Capacity: 1000 l / h.
With skid, panel, frequency inverter.
Isothermal process tank with mixer, double spray ball.
Capacity: 1,000 L.
1000 liter capacity isoth... |
Others suggested equipment for you:
|
|
 |
Brand: Mesal
Filling Machine.
Brand: Mesal .
Model: E30G2.
Approximate production: 9,000 bottles / hour.
500 ml PET bottle.... |
|
|
 |
Stainless steel tank with lid.
100 litre capacity.
no motor.... |
|
|
 |
Stainless steel tank with mixer and simple.
1400 litres capacity.... |
|
|
 |
Brand: Serpack
Components: Atos, WEG
Vertical powder wrapping machine
Brand Name: Serpack.
Model: SPK 250.
Machine with panel.
Inverter Weg CFW 8 and Weg CFW 10.
Servo driver / Servo converter / Servo converter Weg SCA 04.
With servo motor, internal thread of dosage an... |
|
|
 |
Stainless steel tank with mixer ...
2400 litres capacity.... |
|
|
 |
Brand: IMSB, Rodopac
Tampador automatic.
Model-TSB 25.6.
Manufacturer-IMSB.
Equipment designed for use in process lines where there is a need for automation in the closing of the plastic bottles, glass or metal. Developed to close bottles with various models of c... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Stainless steel tank.
1000 litre capacity.
With motor and reducer.... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
 |
Stainless steel tank.
150 litre capacity.
no motor.... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
Brand: Alsop
Stainless steel tank with simple jacket without mixer.
Brand: Alsop.
Capacity 200 liters.
Approximate measurements:
Tank height: 74.5 cm.
Height feet: 96.5 cm.
Diameter: 62 cm.... |
|
|
 |
Brand: Niva Pack
Components: Allen-Bradley
Vertical powder packer with volumetric system
Brand Name: Niva Pack.
Model: Absolut 350.
With pneumatic system of dosage of trough.
Machine with shape and thread.
Electric panel.
Allen Bradley PanelView 300 Micro Vision Panel.
Al... |
|
|
 |
Tank insulated with refrigeration, internal in stainless steel and external in carbon steel.
Capacity of 1,300 liters.... |
|
|
 |
Brand: Westfalia
Mechanical automatic Milker.
Mark West Falia.
460 RPS-1.5 HP Model.... |
|
|
 |
Stainless steel tank.
250 liters capacity.
no motor.... |
|
|
 |
Stainless steel tank with lid.
Capacity of 100 liters.
Without engine.
External measures:
1500 mm x 700 mm x 700 mm (height x width x length).
Internal measurements:
600 mm x 470 mm (height x diameter).
Diameter mouth: 195 mm.... |
|
|
 |
Brand: Parkintec
Automatic sealing machine.
Brand Name: Parkintec.
With shrink tunnel for electric heating with double pool.
Production of 1000 packages per hour.... |
|
|
 |
Brand: Fabrima, Masipack, Vertopac, Vertopack
Automatic vertical cartoner.
March Fabrima.
Vertopac Model VP-120.
Elongated with production up to 120 / min.... |
|
|
 |
Brand: Friomax, Tecnoinox
Line for cheese making.
Composed by:
Cream tank in stainless steel, with 4 feet.
Brand: Friomax.
Capacity: 350 kg.
Stainless steel isothermal tank.
Capacity: 10,000 l.
Stainless steel multi-purpose tank with 4 feet.
Capacity 2... |
|
|
 |
Brand: Imdec
Filling with 12 heads.
Brand Name: Imdec.
Model: D-613.
Capacity 200 bottles per minute.... |
|
|
 |
Brand: Alfa Laval, APV, Josmaq
Machinery industrial Dairy
emvase Josmaq yogurt machine 2000 units time
alfa laval heat exchanger of 10000 litres time
isotermico 11000 stainless tank James
10000 litres of APV pump time.
centrifoga 10000 litres time APV
11000 litres stor... |
|
|
 |
Internal molten stainless steel tank.
150 liters capacity.... |
|
|
 |
Milk storage tank.
2 units of 20,000 Lts.
1 unit of 25,000 Lts.
... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
