|
|
 |
Professional with more than 15 years of experience in chemical industry regulations and systems.
It has a company of industrial, environmental, certifications and NBR Standards.
PROFESSIONAL SUMMARY
Professional with vast experience in Managem... |
|
|
 |
PP plastic injection mold for a gas station toy.
Plastic toy mold for injection molding.
Quantity: 2 units.
Mold dimensions: 235 x 349 x 350 mm.
Injection cycle: 20 seconds.
Productive molds manufactured in Joinville, SC.
Both molds... |
|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Brand: Metaltec
Polyurethane injection molding machine for the manufacture of diamond cables.
Brand: Metaltec.
Vertical hydraulic closure, guided by columns, horizontal injection through motor and hydraulic cylinders.
Security system comprising: automatic m... |
|
|
 |
Plastic injection mold set.
For ABS, polystyrene or polypropylene.
For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack.
Average cycle of 45 seconds.... |
|
|
 |
It manufactures a production line for zipper sliders.
The zipper slider factory is responsible for producing sliders, which are the metal parts responsible for opening and closing the zipper when they are slid over the teeth.
Slider Production ... |
|
|
 |
Brand: Jomar
Components: Allen-Bradley
Blow molding machine for PE, PS, PP and HDPE bottles.
Manufacturer: Jomar.
Model: 85S.
Injection and blow molding.
Year of manufacture: 2010
Origin: USA.
With manual.
Standard features:
1) Fully proportional hydraulics.
2) Al... |
|
|
 |
Mold for blow molding machines.
Blow molding 1 x 8 cavities, code 0160
Jomar machine.
Pot weight 16 GS
It has 24 blow molding pins, 08 injection nozzles,
03 injection pin supports,
01 extractor ruler, an injection manifold for the p... |
|
|
 |
Mold for disposable dish injection.
Format for round disposable dish with 15 cm.
2 wells.
Year: 2016.
Steel 2711.
For injection by hot camera.
2 nozzles.
Cycle: 6.1 seconds.... |
|
|
 |
Molds for injection of plastic boxes.
Steel 1100 temperadora.
A cavity.
Approximate weight: 1,500 kg.
Measures:
Width: 625 mm.
Length: 895 mm.
Total height (closed): 362 mm.... |
|
|
 |
Brand: Tornearia Van
Pingaderia for tarrecos biscuits and other food products.
Brand: Turning Van.
Estimated production: up to 20 molds / min (watch 4 ovens simultaneously).
Includes three aluminum dies for uniform injection of the dough in ball shapes (108 unit... |
|
|
 |
Brand: Refrisat
Lot of 5 Thermoregulators.
Manufacturer | Brand: Refrisat.
Model: TMTI-009-W-Z.
Quantity: 5 units. Sold as a closed lot.
High-standard equipment, essential for thermal control in injection, extrusion, and blow molding processes.
Quanti... |
|
|
 |
Components: ABB, Siemens
Industrial line for production of soft capsules (Softgel) used in pharmaceutical, nutraceutical, cosmetic, veterinary and food industries.
Equipment designed for encapsulation of liquids, vitamins, dietary supplements, nutraceutical oils, natural ... |
|
|
 |
Production line for batteries and plastic parts for cell phones of various brands and manufacturers.
Year of manufacture: 2018.
Injection molding machines for manufacturing plastic parts, batteries, ultrasonic welding, spot welding, pad printin... |
|
|
 |
Brand: Semeraro
Plastic injection molding machine.
Manufacturer | Brand: SEMERARO.
Model: 790/220.
Capacity: 220 tons.
It was used to make the thermoplastic lens for an outdoor wall light.
Year of Manufacture: 1998.... |
|
|
 |
Brand: Borunte
Industrial robot.
Manufacturer | Brand: Borunte.
Maximum arm length: 1850 mm.
Maximum weight capacity: 20 kg.
Lightweight arm designs and compact, simple mechanical designs allow for flexible work in small spaces and meet the needs of fle... |
|
|
 |
Brand: Trane
Industrial chilled water bank chiller 650 TR with water condensation.
Manufacturer | Brand: Trane.
Model: CVGF650.
Refrigerant gas: HFC-134a.
Lubricating oil: Trane Oil 48.
Weight: 10,900 kg.
Year: 2005.
Approximate dimensions:
... |
|
|
 |
Brand: Engel
Injection molding machine for solid silicone rubber (HTV).
Manufacturer | Brand: ENGEL do Brasil Ltda.
Model: ES 600/200.
Clamping force: 200 tons.
For injection of 318 cm³ of solid silicone.
With 750 x 750 mm tables.
The distance b... |
|
|
 |
Brand: Sinitron
Plastic injection molding machine.
Manufacturer | Brand: Sinitron.
Model: SYA-1300 DT.
Force: 130 tons.
Capacity: 315 cm³.
Year: 2006.
3 years in operation.
For flexible PVC products, ear protector cushions, and others.
Meetin... |
|
|
 |
Brand: Sandretto Lógica
Plastic injection molding machine for injectable parts.
Manufacturer | Brand: Sandretto Lógica.
Model: 770/220.
Capacity: 220 tons.
Year: 2004.
Still operating occasionally.
Averaging 90% of planned performance.... |
|
|
 |
Dryer and dehumidifier for plastic granules such as PP.
Manufacturer / brand: Siccus.
Model: Compacta plus.
Approximate capacity: 100 to 150 kg per hour.
The raw material such as plastic enters the machine, which dries and dehumidifies th... |
|
|
 |
Brand: JASOT
Zamak aluminum or brass injection molding machine.
Manufacturer/brand: Jasot.
Model: 150.
Approximate capacity: up to 150 tons.
Year: 2022.
Usage time: 02 years 06 months.
For injection of aluminum, zamak or brass parts for the auto... |
|
|
 |
Brand: Dj fornos
Low pressure aluminum injection molding machine.
Brand: DJ ovens.
Capacity: 1,000 kg
Direct injection parts: 50 kg of aluminum,
It was used to make wheels.
Year: 2005.
The integrated oven reserves up to 1000.00 and injected in 2 hou... |
|
|
 |
Brand: Altus, Buhler
Components: Vicker
Aluminum injection molding.
Brand: Buhler.
For 600 tons.
COLD CHAMBER ALUMINUM INJECTOR.
Retrofite of the equipment in 2008.
Locking capacity 600 tons.
With: - Double Vicker pump.
Engine 30 CV.
Altus CLP. ** 4 directional valv... |
|
|
 |
Plastic injection molds.
3 units.
With 1 cavity.
Year: 2016.
Molds were developed to produce charging stations for smartphones and cell phones.
It consists of 3 lockers with to place locks.
Front cabinet.
Cavity back cover.
Lo... |
|
|
 |
Brand: Miotto
Miotto stainless steel cooler.
30 kg Capacity.
Cools the temperature up to 60° c.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: Miotto
Brand mixer Miotto.
Mixture composed of rigid PVC or flexible capacity 200 kg/hour.
-30 HP Engine.... |
|
|
 |
Brand: Embrapac
Brand Name: Embrapac.
Model: MPF TP.
little bags with feeding mat forming.
The pull system is made by hand with suitable rubber not to mark the packaging. The correctness of the Court is automatic, the size of the bag, is performed by photo... |
|
|
 |
Brand: Posimat
- Bottle positioning machine.
- Brand: Posimat.
- Model: Master 20.... |
|
|
 |
Brand: Stokes
Stokes vacuum granulator.
Rpm: 1750.... |
|
|
 |
Brand: Manesty
Granulator gum.
Brand: Manesty.... |
|
|
 |
Ribbon mixer Banerjee, helical, in stainless steel to 600 litres.
Complete machine in good condition.... |
|
|
 |
Brand: Borgmar, Mecanoplast
Complete extruder for emulsion resin for production of plastics into synthetic PVC.
technical details:
01 mono 120 mm screw Extruder, Borgmar brand
120 mm thread, 75 HP motor, resistors made in stainless steel for heating the plate, base made o... |
|
|
 |
Brand: Battenfeld
Industrial plastic injection molding machine.
Brand: Battenfeld.
Capacity: 2000g to 500 tons.
Year: 1981.... |
|
|
 |
Cap molds with side glasses.
We are putting on sale the molds the brand Zé da Graça, containing as main product, side glasses plastic cap (where one can consume the liquid contained in them through straws).
-Cap molding.
Plastic injection mou... |
|
|
 |
Injection.... |
|
|
 |
Brand: Saip
Hard Polyurethane injection machine
k12k * High. * model:
SRL Saip Cabiate (COMO) K60-ES
N° de serie: Italian 375... |
|
|
 |
Brand: Mecanica Oriente
Plastic injection Orient.
Model: IHP 140/250.
Capacity: 250 cm ³.
Year: 1986.
Panel: MCPII.... |
|
|
 |
Multipurpose clip-polycarbonate mold
32 CV-works well with 24 HP.
6 g Weight.
33 s Cycle.
Uses 160 tons machine.
dimensions 45 x 20 mm.... |
|
|
 |
Dough Sheeter/Molds/extruder
MAIN PRODUCTS:
Spoiler Front Spoiler Side
-k12k * rear Spoiler * Vacuum Forming Machines (04)
extruder and Laminator (01)
suction Moulds (79)
cutting and finishing Molds (220)
spray booth (01)
Compressor (... |
|
|
 |
Blow and Injection... |
|
|
 |
Micronizador of 400 kg per hour for PE and PP new micronization.
National technical assistance.... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Brand: Sulpol
Poliutretano injection of Sulpol, model ST-rise of 15 with P15A Kg/min... |
|
|
 |
Brand: Fibermaq
Low pressure polyurethane injection.
Manufacturer: Fibermaq.
model: PUF 7 Basic.
voltage: 220 v.
air Consumption: 20/80 PSI PCM.
Power Consumption: 4431 Watts.
applications:
:
low density rigid foams.
flexible foams.
integral skin... |
|
|
 |
Brand: Miotto
Granuladeira extruder for sale.
Brand: Miotto.
Capacity: Approximately 350 Kg/h
Monorosca semi new.
All new Panel.
Dry sanding.... |
|
|
 |
Brand: Nissei
Injector/PET preform mold with injection 4 and 20.
Brand Name: NISSEI ASB.
Model: PF6-2B.
Year: 1997.
Productivity: 1200 to 1600 g/h
in the production of PET bottles of 100 ml to 2000 ml (soft drinks, wines, brandy, vinegar and others).
F... |
|
|
 |
Large industrial plastic injection molding machine.... |
|
|
 |
Brand: Mecanica Oriente
East 60/100 injection pump
dual digital control ... |
