Polypropylene reactor tank 5,000 L

Polypropylene reactor tank 5,000 L Need maintenance technician, revision and warranty? Click here. Equipment code: 774-082  UNAVAILABLE  Polypropylene reactor tank. Approximate capacity: 5,000 liters. With motor and rod with spreader. It has a base for support on the floor.

Other similar equipment for research results :

	Grabe 2,000-liter industrial plastic tank made of polypropylene PP polymer Equipment code: 142-888 Brand: Grabe Industrial plastic tank made of PP polypropylene polymer. Manufacturer | Brand: Grabe. Approximate capacity: 2,000 liters. Approximate tank body measurements: Height: 175 cm. Diameter: 127 cm. Mobile tank with wheels....
	Grabe 2000 L industrial plastic tank made of polypropylene polymer Equipment code: 231-547 Brand: Grabe Industrial plastic tank made of PP polypropylene polymer. Manufacturer | Brand: Grabe. Approximate capacity: 2,000 liters. Mobile tank with wheels....
	Grabe 1,000 L PP Polypropylene Plastic Tank Equipment code: 084-881 Brand: Grabe Plastic tank made of polyethylene PP polymer. Brand: Grabe. Approximate capacity: 1,000 liters. Approximate tank body measurements: Height: 180 cm. Diameter: 110 cm. Mobile tank with wheels....
	Grabe 2000 L PP Polypropylene Polymer Plastic Tank Equipment code: 707-768 Brand: Grabe Cylindrical plastic tank made from PP polypropylene polymer. Manufacturer | Brand: Grabe. Mobile tank with wheels. Approximate measurements: Approximate capacity: 2,000 L. Approximate tank body measurements: Height: 175 cm. Diame...
	Bomax polypropylene plate filter press Equipment code: 712-663 Brand: Bomax Filter press with polypropylene chamber plates. Manufacturer/Brand: Bomax. Model: 20/30. Number of plates: 20. Maximum number of plates allowed: 30. Intended for solid-liquid separation (solids filtration) through the forced passage of...
	Master Pump 50 liter laboratory polypropylene mixing tank Equipment code: 754-761 Brand: Master Pump Polypropylene mixing tank. Approximate capacity: 50 liters. Manufacturer | brand: Master Pump. With removable lid. Tank with extended service life for use with chemical products. Main applications: chemical and petrochemical industries...
	Plastic injection mold set Equipment code: 886-121 Plastic injection mold set. For ABS, polystyrene or polypropylene. For: paper towel dispensers, toilet roll and intercalated toilet, soap dish and paper towel coil towel rack. Average cycle of 45 seconds....
	Stainless steel skeleton trolley Equipment code: 588-022 18 stainless steel skeleton trolleys. Targets for 1, 2, or 3 trays per level. Optional: 950 polypropylene boards 40 x 60 x 5 mm. For transporting, cooling, and resting food....
	Cellar for fermentation, maturation, and storage of beer. Equipment code: 022-503 Cellar for complete fermentation and maturation of beers. Composed of: - Cylindrical conical storage tanks in sanitary stainless steel for glycol. Approximate capacity: 3,000 liters. Usable capacity: approximately 2,500 liters. Quantit...
	Pugliese bottle blower Equipment code: 822-403 Brand: Pugliese Blower for blowing polypropylene plastic bottles. Manufacturer/brand: Pugliese. Model: P - 5. Year: 1999. Approximate production capacity: 550 g/h. With original electric motor control in dosage.a With 500 ml and 1500 ml molds. T...
	Professional in the area of plastic Equipment code: 124-146 Professional in the area of plastic. Consultant for project development, processes, cost reduction in terms and processes. 25 years of experience in processing industries and product development lab: -PVC. -Term engineering plastics. -Polyo...
	Benchtop pneumatic diaphragm pump mini pump Wilden Equipment code: 428-163 Brand: Wilden Benchtop pneumatic diaphragm pump mini pump. Manufacturer brand: Wilden. Model: P.025/PPPPP/WFS/TF/PWF. Year: 2020 and 2018. Quantity: 2 units. Others suggested equipment for you: Alfa Laval sanitary transfer pump Equipment code: 884-628 Brand: Alfa Laval Alfa Laval sanitary transfer pump - Pontecia: 7.5 hp - 3 phases. - Voltage: 220/380 V. - A 19.1 / 11.1 - Hz 60 - 3,500 rpm... Semi-automatic electro-pneumatic stainless steel capping machine by Km Máquinas Equipment code: 820-830 Brand: Km Máquinas Semi-automatic, benchtop, electro-pneumatic stainless steel capping machine. Manufacturer | Brand: Km Máquinas. Model: BA002. Semi-automatic equipment, allows pressure adjustment, has a parts counter, and a height-adjustable column. Power... Tank jacketed with cooling Equipment code: 144-056 Tank insulated with refrigeration, internal in stainless steel and external in carbon steel. Capacity of 1,300 liters.... Stainless steel tank with cooling system Equipment code: 613-625 Stainless steel tank with internal cooling like tina. 220 litres capacity.... Tanque reator de pressão encamisado em inox 200 L Equipment code: 035-600 Jacketed stainless steel pressure reactor. With motor, reducer and scraper shaft. Approximate capacity: up to 200 liters. For mixing homogenization of products such as cosmetics, chemicals, among others. Equipment internally in stainless ... Filter sparkler 50 L Equipment code: 472-874 Filter sparkler. Stainless steel. Capacity: 50 liters. With pump.... Stainless steel 1000 L storage tank with agitator Equipment code: 016-318 Stainless steel tank. 1000 litre capacity. With motor and reducer.... Stainless steel tank for 1000 liters Equipment code: 251-133 Stainless steel tank with simple shirt with lid without agitator. Capacity: 1,000 liters. Measures: diameter: 1000 mm. height: 1300 mm. overall height: 1900 mm.... Stainless steel tank for 500 L Equipment code: 445-847 Stainless steel storage tank. 500 liters capacity. With carbon steel support. Output of the product from the side. With motor and propeller shaft.... Heat exchanger tank Equipment code: 017-552 Brand: Implantação Engmaq Stainless steel tank with serpentine. Brand: Implantation Engmaq. Capacity: 35 liters. Area: 0,30 m2. Pressure Design: Side / Serpentine - 3/5 Bar / man. Design temperature: Side / Serpentine - 80/80 C. Operating pressure: Side / Se... Stainless steel storage tank Pavan Equipment code: 720-121 Brand: Pavan Group Stainless steel storage tank with a capacity of approximately 1000 litres, mark Pavan, with line control panel ... Industrial mixer for sugar, glucose for soft or hard candies Equipment code: 737-640 Brand: Maicon Maras Sugar, glucose mixer to soft or hard candies brand Maras, Coolnix model composed of 2 300 liter tanks and 1 tank 100 litres lung ... Stainless steel jacketed tank 1000 litres Equipment code: 547-040 Stainless steel jacketed tank 1000 litres.... Tank tanks for grease for 10 tonnes Equipment code: 441-843 2 jacketed Tanks for reception of fat to 10 tons each. internal finish in carbon steel insulated.... Jacketed tank 5000 litres for chocolate Equipment code: 240-641 Jacketed tank 5000 litres for chocolate-carbon steel.... Industrial mixer tank for cream Damix Equipment code: 152-164 Cream mixer tank Damix. emergency Button. -Inhibits any cream mixer tank firing. -Fires in emergency situations and used in cleaning and maintenance. -to activate, simply press the red button.... 4,000-liter jacketed carbon steel tank with stainless steel outer coating. Equipment code: 014-315 Carbon steel tank with stainless steel outer casing. Approximate capacity: 4,000 liters. Mixer plate thickness: 3/4". Motor with VECTOR manufacturer gearbox. Type/model: R92 DV160L-4. Voltage: 380 V three-phase. Current: 32.63 A. ... Jacketed tank 4800 litre Equipment code: 068-070 Resistance heating jacketed storage tank. Approximate capacity: 4800 liters. In carbon steel with motor, reducer and agitator. Approximate measurements: Outside diameter: 2200 mm. Inner diameter: 1850 mm. Internal height: 1800 mm. ... 2,000 liter internal stainless steel jacketed tank Equipment code: 080-001 Tank for 2,000 liters. Internal jacketed tank in stainless steel. External carbon steel Note: Equipment missing motorbike and agitator set.... Fat storage silo with a capacity of 12 tonnes Equipment code: 506-008 Carbon steel silo insulated with stainless steel support. approximately 5 1000 litres Capacity for glucose and other. stainless steel Built-in. total height with protection grid: 6 meters. height of the silo with the feet: 4.85 meters. gr... Stainless steel tank with sanitary pump Equipment code: 640-858 Brand: FPS Components: Lafert Gear pump with dosing hopper. Equipment built in stainless steel. Brand: Food Process Solutions, Italian FPS. Voltage: 380 V. Frequency: 60 Hz. Power: 1/1 Kw.... Air receiver mark Worthington Industries Equipment code: 067-070 Brand: Worthington Air reservoir. Brand name: Worthington Industries. For 0.85 cubic meters and pressure 8,8 kg cubic meters.... 5 vertical cylindrical Tanks in carbon steel 4000 L each Equipment code: 531-482 Brand: Eteq 5 vertical cylindrical Tanks in carbon steel 4000 L each. Built for use as pressure vessels for hydrogenation of fats. Old but never used. Brand: Eteq. Diameter: 1.60 m. height: 2.00 m (feet).... 2 Silos for storage of sugar with capacity of 10 tons each Equipment code: 042-053 2 Silos for storage of sugar with capacity of 10 tons each. composed of threaded reception silo 6 meters long by 6 inches in diameter and thread 3 inch outlet diameter.... Mixer in stainless steel with screw and pump transfer cookie stuffing Equipment code: 054-066 Stainless steel tank with screw and transfer pump and extraction of helical thread product. Used for biscuit industry for storage and transport of biscuits and stuffing....

Camargo Industrial conducts the study and cross-referencing of data for each piece of equipment approved for advertisement, maintaining a high-level business ecosystem. For intermediary machines, the information is provided by third parties and must be validated under the responsibility of the buyer, with Camargo's support in indicating specialized consultants and technicians. This support aims at the safety and reliability in evaluating the condition of the equipment, the need to comply with the regulatory standards of the Ministry of Labor, and fundamental information for a secure transaction.
Camargo Industrial's own inventory is available for viewing at our headquarters, where we offer technical inspection accompanied by the rigor of our professionals. Scheduling is required for visits.