|
Used Equipments for sale
Press for stamping steel sheets Gutman
>> Metal
|
|
|
|
|
| Press for stamping steel sheets Gutman |
|
Press for stamping steel sheets, bending and drawing cut.
Brand: Gutmann.
Model: P20 150.
Year: 1989.
Capacity: 150 tons.
Average production: 3,000 strokes per minute.
Engine: 15 hp. |
|
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Maqmundi, Mec bier, MMC TEC
Beer bottling equipment.
Composed of:
- Semi-automatic stainless steel beer keg washer and filler.
Approximate capacity: one keg in approximately 3 minutes.
Features:
· Stainless steel tank with heating element for alkaline solution fr... |
|
|
 |
Stamping set for hard candies.
Model: IMD.... |
|
|
 |
Pyramidal wrapper.
Model: CTKS 300.
Equipment made in China.
It is a high performance, small size vertical wrapper, which allows installation in small spaces, easy operation, stable work and low noise. All equipment is controlled via PLC, en... |
|
|
 |
Chinese sachet filling machine.
Production: 3500 to 4000 units per hour, packages up to 250 mm in length.
Model: GH400Y.
With two filling ways, possibility to upgrade to four filling ways.
Equipped with photocell for reading printed mar... |
|
|
 |
Brand: Stork
Rotary stamping stamping machine.
Manufacturer: Stork.
Model: Stork RDII.
Capacity: 12 colors.
For printing pigment or reactive fabrics.
Year: 1974.
Operation time: 12 years.
It has a steam heated dryer/dryer.
The fabric exit ... |
|
|
 |
Brand: ACG, Almapal, Pam
Components: Hindustan, Siemens
Vacuum ACG Pam for tablet press encapsulation.
Brand: ACG Pam.
Engine: 3.0 HP.
R.P.M: 3450.
Frequency: 60 Hz.
Components:
Hindustan Engine.
3TW42 Siemens Encapsulated Starter Magnetic Switch.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Sorg
Guillotine press for cutting sheet metal.
Manufacturer: Sorg.
Model: SGH 47 / 30.... |
|
|
 |
Wafer sheet forming and assembly machine and wafer sheet press.
Cylinder press to adjust the height and thickness of the wafer sheets.
First, the block is formed with wafer sheets, and then the block is pressed by the cylinder to adjust the hei... |
|
|
 |
Table with two tubs of approximately 100 liters.
With sliding piston system to extract juices.... |
|
|
 |
Brand: MONKEY
Rubber vulcanization press 700 x 500 mm.
Manufacturer | Brand: MONKEY.
Plate dimensions: 700 mm x 500 mm.
250 mm piston.
Has 3 slots.
Year: 1990.
For manufacturing rubber parts through vulcanization.
With 5 HP WEG motor.
Volta... |
|
|
 |
Brand: Claumaq
Hydraulic press for bar soaps.
Manufacturer | brand: Claumaq.
Model: 001/2022.
Approximate capacity: up to 800 units per hour.
Manufactured in: 2022.
Equipment stopped since 2023.
For pressing bar soaps.... |
|
|
 |
H-type hydraulic press with two operating fronts and independent controls.
For compaction with automatic feeding silo.
Model: PHH100T.
Dough feeding, pressing and vertical and horizontal detachers.
Approximate capacity: 100 tons.
Dough... |
|
|
 |
Brand: Fima
Extruder press for short and long pasta.
Manufacturer: Fima.
Approximate capacity: up to 150 kg / hour.... |
|
|
 |
Brand: Braibanti
Extruder press for short dough and long dough.
Manufacturer: Braibanti.
Approximate capacity: up to 250 kg / hour.... |
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Brand: Peres & Canheiro
Dosing machine with horizontal stainless steel paddle mixer.
Manufacturer | Brand: Peres & Cannheiro.
Approximate capacity: 120 kg.
For pasty and granular products such as crushed garlic, garlic paste, creamy candies in jars such as dulce de... |
|
|
 |
Filter for industrial processes in stainless steel sparkler type.
Year: 2004.
Hydrostatic test: 10.0 KGFcm²
Maximum permitted working pressure: 7.0 KGFcm².
Volume: 300 L.... |
|
|
 |
Technical consultancy for the purchase and sale of new and used equipment.
For various segments such as: Food, Cosmetics, Pharmaceuticals, Nutraceuticals, Chemicals, Agro, Pets and others.
Main equipment:
- Vertical Filling Machine (Pillow |... |
|
|
 |
Brand: Piróg
Dosing machine for liquids and semi-liquids.
Manufacturer: Piróg.
For dosing different densities of products, such as: meringues, jellies, diet candies, carolina, manioc flour biscuits (balls and sticks), champagne biscuits, English cake, filli... |
|
|
 |
Brand: Rtech
Pilot plant for biscuit processes.
Manufacturer: RTech.
Model: MiniLab.
For the development of biscuit processes.
Composed by:
- Mixer in stainless steel.
- Laminator.
- Foliage and flour sprinkler system.
- Rotary moulder wit... |
|
|
 |
Brand: Piróg
Dosing machine for chocolates and creams.
Brand: Piróg.
Equipment with two vats, ideal for chocolate products, tablets, drops and chocolates.
Width: 450 mm.
Number of nozzles: 52.... |
|
|
 |
Brand: Hebleimar, Piróg
Line for the production of sweets like "denies tit", Dan Nhá.
consisting of:
2 drip trays of marsmallow with 14 burners each.
cooling tunnel and chocolate brand cobrideira Piróg.
Measures: width 1.10 m by 10 m length and height 1.25 m.
widt... |
|
|
 |
Monobloc for the process of chopping, spinning and molding mozzarella cheese dough.
Allows for a standardized finish to the final product.
Approximate capacity: 1,800 kg per hour.... |
|
|
 |
Brand: Ata, Frigomaq, Incalfer, Sondex
Components: WEG
Sondex plate heat exchanger standard with plates in stainless steel AISI-316
heat exchange station smart-heat model with sondex plate heat exchanger mounted.
knives and sharpeners sterilizer Frigomaq
spray for disinfecting hands Frigomaq
kniv... |
Others suggested equipment for you:
|
|
 |
Semi automatic baler for SOAP (without mold).... |
|
|
 |
Brand: Jones
Press Jones and conveyor belts... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB
Sigma mixer, calender, extrusion and soap press.
Estimated production capacity: between 900 kg / h * up to 1,000 kg / h **.
Machines for the manufacture of soap composed of:
Sigma mixer for soaps.
Brand: G.Mazzoni.
Yield: 175 kg of bas... |
|
|
 |
Brand: Claumaq, Conserli, Lobopack
SOAP-making line composed by:
-stainless steel Mixer dust.
Brand Name: Conserli.
Model: MP 200.
Year: 2006.
Capacity: 200 kg.
Motor 1.5 HP.
1.50 m x 1.00 m x 1.60 time.
-
SOAP cutter Has 21 teeth, this in perfect operating condi... |
|
|
 |
Brand: Nardini
Lathe.
Brand: Nardini.
Model: MS-350.
Dimensions: 1.50 m of busbar.... |
|
|
 |
Brand: French Oil Mill Machinery, Imapre
02 large Presses with capacity of 750 tonnes (brand name: THE FRENCH OIL MILL MACHINERY co.)
04 small Presses with a capacity of 350 tonnes. (tag: IMAPRE)
fully automated Greenhouse
02
Retificas for wheel... |
|
|
 |
Brand: ROMI
CNC lathe
brand name: Romi Centur k12k * model: * 30 D
Command
year 9 Mach 2004.
With electric Tower 8 positions.... |
|
|
 |
Brand: Andritz
Press filter.
Brand: Andritz.
The whole set for sale for an unbelievable price, the set comprises:
- Frame (frame) 800/60.
- Drawing pressure 8 bar.
- Locking system 264MPA-E, single acting hydraulic cylinder with return
by spring and... |
|
|
 |
Brand: ROMI
CNC lathe Galaxy 10 Romi.
Year: 2002.
Fanuc 21I command.
Chip carrier.
Pistol washing.
12 Tower positions supported by tools.
Machine working 100%.... |
|
|
 |
Brand: Oxipira
- Plasma cutting machine.
- Brand: Oxipira.
- Equipment year: 2015.
- Machine purchased and never used.... |
|
|
 |
Brand: Poreba
Torno.
Brand: Poreba.... |
|
|
 |
Press to manufacture peanut butter cups stopper, capacity 140 pieces/minute
... |
|
|
 |
Brand: Ares Seiki
Machining center.
Brand Name: Ares Seiki.
Model: A-600.
Fanuc Command.
Courses: 600 mm x 400 mm x 600 mm.
table size: 700 mm x 410 mm/8,000 RPM-BT 40.
Magazine Exchange quickly for 24 tools.
Advances: 36/36/36 m for minute... |
|
|
 |
Brand: ROMI
CNC lathe Romi Centur 30 D Multiplic.
Year: 2007.
Control: Fanuc.
Electric Tower 8 positions.
Among tips: 1,000 mm.
Against pneumatic point.... |
|
|
 |
Brand: Maho
MARK MAHO MH MODEL 600E with CNC432 COMMAND and COLOR VIDEO GRAPHIC CONNECTION 24V for 22 tools, NP 48588, IS0 40. ... |
|
|
 |
Press with 14 holes for paçoca.... |
|
|
 |
01-03 ton press (green)
-01 03 ton press (green) c/bookmark
-preensa 01 of 04 ton (Brown)
-01 08 ton press (green)
-01 08 ton press (green)
-01 nylon roller machine p/cutting torch parts
-01 p/calender tracking parts and or materials
to... |
|
|
 |
Brand: VMA
Plaina limadora.
Brand: VMA.... |
|
|
 |
Brand: Heidelberg
Hydraulic Press Heidel... |
|
|
 |
Brand: Giustina Farell
Diameter: 2600 mm.
Step in the movement: 2032 mm.
permissible length between centers: 10000 m
maximum weight between centers: 200 tons.
Fagor 8055 CNC: S
year: 80.
Weight: Approximately 250 tons.... |
|
|
 |
Brand: Rocco
CNC Vertical milling machine
* F 700 (CNC)
k12k * Mark ROCCO *-F MODEL 700
400 * k12k DIADUR command *
... |
|
|
 |
Tacho inox.
Capacity: 2000 l.
Tacho inox.
Capacity: 660 l.
Tacho inox.
Capacity: 200 l.... |
|
|
 |
Brand: Nomura
Mechanical guillotine mark Nomura, cutting capacity-mild steel 55 mm, length 1200 mm cutting useful motor power 55 kw, knife length 1830 mm, weight 45 tonnes... |
|
|
 |
Brand: GOITI
PGA-4 model punch mark GOITI... |
|
|
 |
Rectify 18000 mm x 2000 mm
Measures-18000 mm x 2000 mm
height: 2000
02 Heads, a
Rotary hydraulic feeding with four engines
With wiring diagrams
... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
