|
|
|
| Phoenix Luferco vertical autoclave 18 liters |
|
Vertical autoclave.
Manufacturer/brand: Phoenix Luferco.
Line: AV.
Model: AV - 18.
Approximate capacity: 18 liters.
Year: 2021.
Voltage: 220V. |
Brand:
Luferco, Phoenix, Phoenix Luferco
|
|
|
|
|
|
Main suggestions:
|
|
 |
Brand: Phoenix Luferco
Components: ABB, Danfoss, Ksb, Omel
Horizontal autoclave with steam generator and vacuum pump.
Manufacturer: Phoenix Luferco.
Capacity: 360 L.
Model: 39206.
Year of manufacture: August 2019.
The equipment was in operation in the pharmaceutical industry for human use, wit... |
|
|
 |
Brand: G.Paniz
Kneading machine with spiral/pig tail type beater.
Manufacturer: G.Paniz.
Model: AE 60L.
Approximate capacity: 60 liters.
With stainless steel bowl.
With epoxy structure.
Voltage: three-phase 220 V.
Frequency: 60 Hz.
Year: 201... |
|
|
 |
Brand: Apitec, Biasinox, Incapi
Lot of ten stainless steel coating machines.
Capacities: between 150 liters and 350 liters.
Machines with and without air blowers.... |
|
|
 |
Brand: Manesty
Capsule press with 16 punches.
Manufacturer / brand: Manesty.
Year: 1980.
With 3 sets of punches.
Including oblong, round and effervescent tablets.
Approximate capacity: 30,000 capsules per hour.... |
|
|
 |
Brand: Neuberger, Riva
Punches pens for compressors.
In stainless steel.
Dimensions of the photos.
Brand: Neuberger / Riva.... |
|
|
 |
Brand: Neuberger
Components: Siemens, WEG
Rotary tablet press for compressing tablets and pills.
For 13 mm round tablets and 19 mm x 9 mm oblong tablets.
Manufacturer | Brand: Neuberger.
Model: MN-20F - 20 punches.
Approximate capacity: 400 to 900 tablets per minute.
Machine p... |
|
|
 |
Stainless steel ball-shaped pans for making sweets.
... |
|
|
 |
Brand: GOITI
PGA-4 model punch mark GOITI... |
|
|
 |
Brand: Amádio
Planetary mixer with two pans.
Manufacturer: Amadio.
Approximate capacity: 40 liters.
With a globe beater and a hook beater.... |
|
|
 |
Autonomous tri-block stainless steel brewer for craft beer production.
Approximate pan capacity: 300 liters.
Year: 2018.
With internal resistance in the 3 pans.
It has 2 pumps attached, one for the mixing pan and the other for circulating... |
|
|
 |
Brand: Himaco
Plastic injection molding machine for P.P.
Brand: Himaco.
Model: APTA ECO 250 WITH SERVO MOTOR.
Average production: 130,000 units per day.
Three-phase voltage 220 v.
Commanded by PLC.
Techmation.
Closing force from 250 tons to 28... |
|
|
 |
Drageadeira with spray.... |
|
|
 |
Brand: Lawes
Carbon steel dragee.
Manufacturer: Lawes.
Model: Drageador.
Approximate dimensions:
Height: 1800 mm.
Width: 1000 mm.
Length: 1200 mm.
Approximate internal dimensions:
Height: 900 mm.
Depth: 480 mm.
Mouth: 380 mm.
Weig... |
|
|
 |
Production line for batteries and plastic parts for cell phones of various brands and manufacturers.
Year of manufacture: 2018.
Injection molding machines for manufacturing plastic parts, batteries, ultrasonic welding, spot welding, pad printin... |
|
|
 |
Brand: Usinox
Simple chicken gizzard processor for slaughterhouses / chicken processing plants. Manufacturer: Usinox.
Year: 2020.
Model: PMSU.... |
|
|
 |
Brand: Maqmundi, Mec bier, MMC TEC
Beer bottling equipment.
Composed of:
- Semi-automatic stainless steel beer keg washer and filler.
Approximate capacity: one keg in approximately 3 minutes.
Features:
· Stainless steel tank with heating element for alkaline solution fr... |
|
|
 |
Brand: Keel Máquinas
Plasma cutting machine for metal parts.
Manufacturer | Brand: Kell Máquinas.
Model: KSD 6000.
Specifications:
Total length: 7500 mm.
Useful cutting length: 6000 mm.
Total width: 3500 mm.
Useful cutting width: 2500 mm.
Gantry h... |
|
|
 |
Brand: CFS Slagelse A/S, Chiacchiera, FMC FoodTech, Gyrocompact Classic, New York Blower
2.185 / 5.000
Complete line for breaded meat protein products such as meat, CMS chicken and formatted or whole fish, pre-fried and frozen IQF.
Approximate productivity: 400 to 500 kg per hour depending on the product.
Year of the line: 2008.
... |
|
|
 |
Mold for blow molding machines.
Blow molding 1 x 8 cavities, code 0160
Jomar machine.
Pot weight 16 GS
It has 24 blow molding pins, 08 injection nozzles,
03 injection pin supports,
01 extractor ruler, an injection manifold for the p... |
|
|
 |
Brand: HAMM
Soil compactor roller | asphalt finisher.
Manufacturer / brand: HAMM.
Type: HAMM 3414.
Model: Compactor rollers.
Fuel: Diesel.
The machine applies, levels and pre-compacts asphalt concrete in paving works.
Its correct use and effici... |
|
|
 |
Brand: Incalfer
Automatic stainless steel fryer with kettle stirrer for French fries.
Manufacturer/brand: Incalfer.
Approximate capacity: up to 200 kg/h.
With grease tank with pump. Approximate capacity of 1500 liters.
Year: Feb/2020.
For frying food ... |
|
|
 |
Brand: Stringal
Food storage tank for glucose.
Approximate capacity: 10,000 liters.
Manufacturer: Stringal.
Year of manufacture: 2020.
It was used for the filling of glucose.
Concentration: 1.44 g / cm³.
Design / operating temperature: 72°C / 72°C.... |
|
|
 |
Brand: Ralf Winter
Filter for syrup and drinks diatomaceous earth in stainless steel.
Manufacturer: Ralph Winter.
Approximate capacity: 9,000 liters / hour.
For filtering simple syrup and beverages.
Year: 2014.
Self-cleaning equipment with vertical plate... |
|
|
 |
Brand: Fapack
Horizontal flow pack packaging machine.
Manufacturer: Fapack.
Model: MMfap.
To work with heat-sealable material such as transparent or printed BOPP.
It has two motor reducers for activation, PLC, two frequency inverters for changes in len... |
|
|
 |
Brand: Amada
Components: Fagor
Punching machine for sheet metal cutting.
Manufacturer: Beloved.
Model: VN 178.
Year: 2010.
Approximate capacity: 20 tons.
Number of tools in the turret: 24.
Power: 16 KVA.
Weight: 8.5 tons.
With CNC Fagor and support tables.
... |
Others suggested equipment for you:
|
|
 |
Jacketed stainless steel pressure reactor.
With motor, reducer and scraper shaft.
Approximate capacity: up to 200 liters.
For mixing homogenization of products such as cosmetics, chemicals, among others.
Equipment internally in stainless ... |
|
|
 |
Brand: Trevi
Bioreactor.
Brand: Trevi.
Model: PCT V 10.
Capacity: 10 L.
Ideal for microbiological laboratory.
Year: 1996.
Aço inox: 316.
Pres.Trab: 1 KGR/CM².
Vacio: 650 MMHG.
Pot.Contr: 0,75 HP.
Pot.Homo: 0,75 HP.
Vel.Contr: 0 - ... |
|
|
 |
Filter sparkler.
Stainless steel.
Capacity: 50 liters.
With pump.... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000.
Excellent state of conservation.
Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
 |
Brand: Ethik Technology, Nova ética
- Laboratory stove.
- Brand: New Ethics / Ethik.
- With digital control.
It is working up to 88 degrees.
Internal dimensions: 50 height x 50 width x 60mm length.
Voltage: 110V.
Single phase.
... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: Tirelli
Labelling machine for bottles, Cologne and perfumes.
Brand: Tirelli.
Model: Delta.
Year: 1999.
Height: 2.00 m.
Width: 1.80 meters.
Length: 2.40 metres.
Weight: approx. 300 kg.... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Km Máquinas
Semi-automatic, benchtop, electro-pneumatic stainless steel capping machine.
Manufacturer | Brand: Km Máquinas.
Model: BA002.
Semi-automatic equipment, allows pressure adjustment, has a parts counter, and a height-adjustable column.
Power... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Stainless steel tank with internal cooling like tina.
220 litres capacity.... |
|
|
 |
Brand: Fabrima, Masipack, Oystar
Components: Allen-Bradley, Altec, Festo, Rockwell, SEW
Machine: The Oystar Fabrima.
Year of manufacture: 2008.
Model: BP 5.
Vision system.
The PLC program is running normally.
Note: Video of binding machine, panel operation, bubble forming modules operation, aluminum film press, mat, coils... |
|
|
 |
Brand: Rodighero
Floor type Bundling with sealing and tunnel trainer.
Rodighero
Manufacturer Machine automatic monoblock baler ER 400.
Used for beverages, foods and chemicals (for example: SOAP, detergent and paint);
cutting and automatic sealing System with ... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Brand: Fanem
- Fanem 345 climate chamber
- Stainless steel inner chamber
- Volume of 270 liters;
- Microprocessed control;
- Temperature: 10 ° to 75 ° C;
- Internal humidity controlled between 35% and 95%;
- Internal circulation of forced air;
... |
|
|
 |
Brand: Wada
Linear piston filling Wada.
With 4 Pistons.
Filling machine can fill gel alcohol
Conveyor
Duo gravity Filling.
Mark-Wada.
Makes packages of 20 ml to 5000 ml.... |
|
|
 |
Brand: Jemak
Automatic sealer for cardboard boxes.
Sealing of the cardboard box by hot glue system, Hot Melt.
Brand: Jemak.
Model: HM 36.... |
|
|
 |
Conveyor screw Stainless steel
- 5 meters long.
Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Brand: Trox Technik
Laminar flow cabin.
Brand name: Trox Technik.
Interior of the equipment in stainless steel.
Series: FLH.... |
|
|
 |
Brand: IMSB, Rodopac
Automatic Capper with 6 nozzles.
Manufacturer: IMSB.
Model: TSB 25.06
6 Nozzles.
Measures 40 mm: 1.50 mm x 1.20 mm x 2.30 mm height.
Bondone and thread plastic bottles of 850 ml.
Capacity of 150 bottles per minute.
Weight 1,100 kg.
... |
|
|
 |
Brand: J.G Equipamentos de Vapor
Steam generator JG EG-16.
heat Production-193,194 Kcal/h.
Evaporation with water at 115° C-216 kg steam per hour.
steam operation pressure 150 PSI-65a.
fuel consumption.
LPG Gas-14.00 kg/h
natural Gas-17 m ³/h.
Motor-0.75 ... |
|
|
 |
Brand: Ethik Technology, Nova ética
Laboratory climate chamber.
Model: 400 / 7D - 300.
Serial Number: 11110/06.
Power supply: 220 V 60 Hz.
Power: 3750 W.
Literature: 5457... |
|
|
 |
Brand: Wada
Automatic electric Wada.
Brand: Wada.
Year: 1980.
... |
|
|
 |
Brand: Imarvil
Stainless steel washer bottles, use to sterilize the product packing container to be filled.
the liquid used to wash is alcohol.
Brand: Imarvil... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Camargo Industrial acts exclusively as an advertising platform. All information, photos, descriptions, conditions, and equipment compliance are the sole responsibility of the advertisers, and it is up to the buyers to verify their accuracy before purchasing. Camargo Industrial does not guarantee the accuracy, completeness, legal and technical availability of the advertised equipment.
Workplace safety with machinery: The platform does not perform inspections or certifications. The suitability of equipment to standards is the responsibility of sellers and buyers.
|
 |
| |
|
