|
|
|
| Alfa Laval SHL 25 high-pressure piston homogenizer |
|
High-pressure piston homogenizer.
Manufacturer | Brand: Alfa Laval.
Model: SHL 25.
Maximum production capacity: up to 9,000 L/H at 250 bar pressure.
Refurbished.
Equipment with panel.
For the food, beverage, dairy, cosmetics, pharmaceutical, and biotechnology industries, among others.
Low- to high-viscosity, aseptic and non-aseptic emulsions and suspensions, including pasteurized milk, UHT milk, cream, yogurt, condensed milk, ice cream mix, fruit juices, concentrates, purées, tomato pastes, seasonings, mayonnaise, sauces, and dressings. |
Brand:
Alfa Laval
|
|
|
|
|
|
Other similar equipment for research results
:
|
|
 |
Brand: Alfa Laval
Skid-mounted centrifugal separator for cleaning oils from hydraulic and other similar systems.
Manufacturer: Alfa Laval.
Maximum capacity: 10.6 m³/h, depending on the product.
Model: MAB 206.
The equipment was recently overhauled and skid... |
|
|
 |
Brand: Alfa Laval
Bactofugal vertical centrifuge with automatic discharge for milk clarification.
Manufacturer: Alfa Laval.
Model: BB-10 HGV.
Approximate hydraulic flow rate: 10,000 L/H.
Approximate flow rate for bacteria removal: 5,000 L/H.
Year: 2017.... |
|
|
 |
Brand: Alfa Laval
Components: SEW-Eurodrive
Bomba lobular de acero inoxidable 316.
Fabricante: Alfa Laval.
Motor: 7,5 kW, fabricante: Sew-Eurodrive.
Modelo: SRU4 / 055 / LS.
Año: 2017.
Voltaje: 460 V.
Amperaje: 12,30 A.
Trifásica.
Grado de protección: IP 55.
RPM: 177... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 11 kW.
Year: 2011.
Internal diameter of product inlet/outlet: approximately 77 mm 78 mm. Check photos of the caliper.
Positive test for 316 stainless steel reag... |
|
|
 |
Brand: Alfa Laval
Components: SEW
Lobe pump in 316 stainless steel.
Manufacturer's brand: Alfa Laval.
Motor: 7.5 kW.
Internal diameter of product inlet/outlet: approximately 46 mm 48 mm. Check photos of the caliper.
Positive test for 316 stainless steel reagent. Check pho... |
|
|
 |
Brand: Alfa Laval
Plate heat exchanger.
Stainless steel.
Brand: Alfa Laval.
Model: M3 - FHC.
Maximum working pressure: 1.0 MPa / 10.0 Bar.
Maximum working temperature: 110 ° C.
Volume: 3 L.... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Brand: Alfa Laval
Stainless steel cooling tank.
Brand: ALFA LAVAL.
Approximate capacity: 1000L.... |
|
|
 |
Brand: Alfa Laval, Tetra Pak
Stainless steel sanitary valve manifold cluster.
Composed of:
- 12 Mixproof valves | double seat valves.
Manufacturer | brand: Alfa Laval.
Mixproof valves or double seat valves are special sanitary valves used to keep two liquids complete... |
|
|
 |
Brand: Alfa Laval
System for heating thermal fluid.
Brand: Alfa Laval, Aalborg.
Model: 25 - HO- 25M.
Year: 2009.
Thermal capacity: 2,500 Kcal / Hour.
Volumetric capacity: 2175 liters.
P.M.T.A: 150 Psig.
Hydrostatic Test: 225 Psig.
Category: 3.
... |
|
|
 |
Brand: Aalborg, Alfa Laval
Heater for industrial heating thermal fluid.
Brand: Alfa Laval Aalborg.
Model: 50 - HO - 50 M.
Process: Thermal fluid heater for propane refining.
Thermal capacity: - 5,000,000 KCAL/H
Volumetric capacity: 2960 Liters.
P.M.T.A - 300 ... |
|
|
 |
Brand: Alfa Laval
Lobe pump for viscous products.
Manufacturer: Alfa Laval.
Model: SRU 4.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifugal pump.
Manufacturer | Brand: Alfa Laval.
Model: CRX 216 F.
Type: Sanitary.
Approximate flow rate: up to 10 m³/h.
Operated for 10 years.
Outlet: 2”.
The pump was used for transferring inverted sugar.
... |
|
|
 |
Brand: Alfa Laval, Netzsch
Stainless steel jacketed mixing tank/agitator/disperser for powders.
Composed of:
- Jacketed dispersing tank for powder products.
Approximate capacity: 500 liters.
With a 12.5 HP agitator.
With a Netzsch helical pump with a 7.5 HP moto... |
|
|
 |
Brand: Alfa Laval
Horizontal stainless steel centrifuge separator for separating solids and liquids in food processes.
Manufacturer | brand: Alfa Laval.
Model: NX - 418.
Approximate capacity: 10,000 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Separator centrifuge separator purify industrial oils.
Manufacturer | brand: alfa laval.
Model: mab 104.
Approximate capacity: 2,200 liters per hour.
To separate fine solids and other impurities.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge separator for separating animal blood phases.
Manufacturer | Brand: Alfa Laval.
Model: BPM 209.
Approximate capacity: 5,000 liters per hour.
For separating plasma and hemoglobin.... |
|
|
 |
Brand: Alfa Laval
Centrifugal separator for industrial oils.
Manufacturer | brand: Alfa Laval.
Model: MOPX 205.
Approximate capacity: 4,900 liters per hour.
For separating fine solids and other impurities.
With panel.... |
|
|
 |
Brand: Alfa Laval
Stainless steel centrifuge for food processing such as juice, beer and wine production.
Manufacturer | brand: Alfa Laval.
Model: VNPX.
Approximate capacity: 2,400 liters per hour.... |
|
|
 |
Brand: Alfa Laval
Automatic centrifugal separator.
Manufacturer: Alfa Laval.
Model: MAPX-207.
With heater, vacuum pump, mug filter, 220 / 380 / 440 V transformer, control panel and waste tank.
For treatment of mineral oils in purification, clarification, d... |
|
|
 |
Brand: Alfa Laval, Nordix
Stainless steel surge tank.
Approximate capacity: 2,000 liters.
With agitator with 10 HP motor.
With Alfa Laval centrifugal pump with 15 HP motor.
With Nordix lobe pump with 3 HP motor.
With 5 automatic valves from Alfa Laval.
Equip... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Endress+Hauser, Inox Biaso, Nordix
Stainless steel jacketed surge tank/mixer.
Manufacturer | Brand: Inox Biaso.
Approximate capacity: 2,000 liters.
Tank agitator with a 7.5 HP motor.
With a 3 HP Nordix lobe pump.
With a 20 HP Alfa Laval self-priming centrifugal pump.
... |
|
|
 |
Brand: Despurifil
Industrial Reverse Osmosis Water Purification System.
Manufacturer | Brand: Despurifil.
Model: DES-806.
Approximate production: up to 8,000 liters.
Permeate production: 65%.
Inlet water conductivity: around 130 µs/cm.
Outlet water c... |
|
|
 |
Brand: Alfa Laval, Endress Hauser, Endress+Hauser, SMAR, Tetralon, Valmicro
Reactor tank for processing food products, among others.
Composed of:
- 2 Mixing reactors with an approximate capacity of 1140 liters.
- 2 Reactor agitators, SEW manufacturer, with a 12.5 HP motor.
- 2 Tetralon lobe pumps, Tetralon manufa... |
|
|
 |
Brand: Alfa Laval, CIP, Endress Hauser, Endress+Hauser, Genova, Nordix, SAMSON, Spirax Sarco
Components: WEG
Production line system for various food products such as:
- Fruit preparations with or without pieces (pieces resistant to pumping);
- Toppings and sauces with or without pieces (pieces resistant to pumping);
- Injectable fillings for cakes ... |
Others suggested equipment for you:
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
- Vacuum duplex extruder with two chambers and G. Mazzoni heated head.
- Maximum approximate capacity of 1000 kg / hour (1,000 soaps / hour of 90 grams
In constant activity).
- With two stages, vacuum chamber, the bottom part is compacted a... |
|
|
 |
Filter sparkler.
Stainless steel.
Capacity: 50 liters.
With pump.... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
 |
Brand: G.C.Neto
Cartridge stamper.
Manufacturer / brand: C. G. Neto.... |
|
|
 |
Brand: Sterling Sihi
- Pump, modular vacuum system.
- Brand: Sterling Sihi / Flowserve
- Model: PL 126 M 10 0A
- Complete technical description of equipment and manual:
| |
|
 |
Brand: Trevi
Bioreactor.
Brand: Trevi.
Model: PCT V 10.
Capacity: 10 L.
Ideal for microbiological laboratory.
Year: 1996.
Aço inox: 316.
Pres.Trab: 1 KGR/CM².
Vacio: 650 MMHG.
Pot.Contr: 0,75 HP.
Pot.Homo: 0,75 HP.
Vel.Contr: 0 - ... |
|
|
 |
Stainless steel tank with 1,500 liters with motor and reducer.
- Tank size 1,20 x 1,20 x 3,14 x 1,40: 4 = 1582 liters = 1500 liters.
- Engine of 5vc 1725 rpm.
- Motor of 220 v / 380v / 440 v.... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Storage tank.
Capacity: 2,300 liters.
Storage tank stainless steel.... |
|
|
 |
Brand: Jormary
Container with 1 container nozzle.
Brand: Jormary.
Model: ES1 Plus.
Stainless steel equipment, polished, including inside the lung funnel, facilitating hygiene.... |
|
|
 |
Brand: G.Mazzoni, Mazzoni, Mazzoni LB
Refining mill with 3 cylinders, 600 mm wide.
Brand: G.Mazzoni.
With equipment control panel.
Approximate dimensions:
Length: 720 mm Useful: 600 mm.
Diameter: 250 mm.
Engine: 20 HP.... |
|
|
 |
Brand: Mesal
Filling Machine.
Brand: Mesal .
Model: E30G2.
Approximate production: 9,000 bottles / hour.
500 ml PET bottle.... |
|
|
 |
Coater in stainless steel tablets.
Type: Drageadeira.
With retractable head.
For approximately 150 L.
With two spray coating.... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Fabrima, Masipack, Oystar
Components: Allen-Bradley, Altec, Festo, Rockwell, SEW
Machine: The Oystar Fabrima.
Year of manufacture: 2008.
Model: BP 5.
Vision system.
The PLC program is running normally.
Note: Video of binding machine, panel operation, bubble forming modules operation, aluminum film press, mat, coils... |
|
|
 |
Stainless steel storage tank.
500 liters capacity.
With carbon steel support.
Output of the product from the side.
With motor and propeller shaft.... |
|
|
 |
Brand: Treu
Masseira pony mixer.
Machine with panel and mechanical components.
Brand Name: Treu.
Manufacturer description: Rotary hopper mixer.
Capacity informed on the plate: 400/500 L.
With motor for automatic opening of the top cover.
With c... |
|
|
 |
Brand: Bonsucesso
- Capacity: 1500 l of mixer and 500 liters of silo approximately.
- The blade mixer is coupled to a lower outlet mezzanine, or silo of the product,
For intermediate transport and storage (silo) for threads
Carriers.
- The equipment has mo... |
|
|
 |
Brand: Prodismaq
- Packing machine for special products.
- Complete equipment built in stainless steel.
- It has 10 dispensing nozzles.
- The equipment was built as a special design, to pack flexible products that need support for conveyor belt, such as seru... |
|
|
 |
Caterpillar type soap cutter.
With 21 teeth.
Some knives are missing.
Approximate knife length: 120 mm. (photo 2)
Total width of roller track: 155 mm. (photo 32)
Maximum width of roller track adjustment: 110 mm. (photo 20 and 28)... |
|
|
 |
Brand: Blipack
Components: Allen-Bradley, Delta, WEG
Thermoforming blister packer for capsule and tablet blisters.
With electronic control and bath retrofit.
Automatic blister machine with 304 stainless steel casing.
Manufacturer: Blipack.
Model: 203.
With intermediate station for finish... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks.
Mrca: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
 |
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles.
Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli.
Model: NEBEL 2 t.... |
|
|
 |
Stainless steel tank.
150 litre capacity.
no motor.... |
|
|
 |
Stainless steel mixer.... |
|
