Used Equipments for sale
Main brands:
Ablimak, Albermaq, Apitec, APV, Arbras, Bausch, Bramak, Brasholanda, Codatec, CompoMaq, Cosmar, Delgo, Dmom, Edward, Engafbras, Erli, Fabrima, Fabrinox, Glória, GRC, Grupo Innovar, Gualapack, Holstein Kappert, Hosten, Huhtamaki Brasholanda, Imacal, Imdec, IMSB, Incomaf, Innovar, Japa Componentes, KHS, Krones, Kugler, LCB, Martinez taboada, Masipack, Mesal, Milainox, Mirainox, Nalbach, Nelpas, Omas, Pack R, Promáquina, Robopac, Rodopac, Ronchi, Rotat, Serac, Sidel, Solbern, Tambflex, Tecman, Ultramaq, Velluto Rebelo, Velutto Rebello, Vinox, VMC Máquinas, Wada, WCJ, West equipamentos, Zanasi, Zegla
|
| Rotary fillers, rotary cappers standalone monoblocks triblocks quadblocks combi |
Fundamentals of Industrial Rotary Filling
Industrial rotary filling is the main method for dispensing and capping liquids, viscous fluids, and pastes in high-speed lines. Unlike linear systems, which operate in intermittent stop-and-go cycles, rotary systems operate in continuous flow. Packages are introduced via feed screws and transfer stars onto a constantly rotating carousel, where rinsing, dispensing, and capping steps occur simultaneously during the angular movement of the equipment.
The main objectives of rotary filling engineering are:
Volumetric repeatability: ensuring high precision in dispensing, reducing waste due to overfilling (giveaway) and meeting metrological control requirements.
Microbiological and physicochemical integrity: minimizing product contact with the external environment, controlling oxygen absorption (oxygen pick-up), and preserving characteristics such as carbonation, viscosity, and sterility.
Overall Equipment Effectiveness (OEE): Maximize line productivity, typically expressed in bottles per hour (BPH).
Fluid Rheology and Packaged Product Matrix
The selection of packaging technology depends directly on the rheological properties of the product.
Low-viscosity liquids, such as mineral water, clarified juices, vinegars, alcohol, sanitizers, and mouthwashes, flow freely by gravity or under low pressure. These products require turbulence control to avoid excessive foam formation.
Carbonated liquids, such as beers, soft drinks, sparkling water, energy drinks, hard seltzers, and sparkling wines, contain dissolved carbon dioxide under pressure. Their packaging requires pre-pressurization of the container to prevent gas loss and foam formation.
Viscous and semi-pasty fluids, such as vegetable oils and lubricants, ketchup, mayonnaise, liquid soap, fabric softeners, shampoos, and syrups, exhibit high resistance to flow. Therefore, they typically use positive displacement systems, such as piston dispensers or pressure-assisted filling.
Highly viscous and pasty products, such as honey, greases, high-viscosity creams, extracts, gels, and toothpastes, require positive-closing anti-drip valves and robust pneumatic or servo-motorized drive systems.
Sensitive or sterile products, including eye drops, vials, pharmaceutical syrups, nutraceutical supplements, and UHT dairy products, require aseptic environments, components manufactured from AISI 316L stainless steel, and complete process traceability.
Packaging, Bottles, and Closure System Specifications
1. Container Materials
PET (Polyethylene Terephthalate) is widely used in bottles for beverages, oils, and cleaning products, standing out for its lightness, impact resistance, and good transparency.
Glass, both returnable and disposable (one-way), is a chemically inert and rigid material, being the standard for premium beers, wines, spirits, preserves, and perfumes.
HDPE (High-Density Polyethylene) and PP (Polypropylene) are used in the manufacture of rigid or semi-rigid bottles intended for cosmetics, chemicals, lubricants, and dairy products.
Aluminum is used in the manufacture of bottles and cans for beverages, offering high mechanical resistance, low weight, and excellent recyclability.
2. Capacity Ranges
Packaging is typically classified as:
Micro-bottles and dropper bottles: from 5 mL to 100 mL.
Conventional bottles: from 100 mL to 2,000 mL (2 L).
Gallons and jugs: between 3 L and 5 L, mainly used for cleaning products, oils, and water.
3. Closure Systems
Among the main types of caps are continuous screw-on plastic caps, in PCO 1881, 28 mm and 38 mm standards, as well as Sport Cap, Flip-Top, Push-Pull models and tamper-evident caps.
Metal caps include ROPP (Roll-On Pilfer-Proof) models for wines and spirits, the traditional 26 mm and 29 mm Crown Cork caps for glass bottles, and Twist-Off caps used in jars and preserves.
Internal components such as stoppers, droppers, spray valves and dosing pumps can also be incorporated.
As complementary sealing systems, aluminum discs sealed by electromagnetic induction and heat-shrinkable seals (shrink sleeves) are used.
Dosing Technologies
1. Gravity or Sustained Pressure Filling
In this system, an upper reservoir feeds the valves by gravity or low pressure. The valve opens when the bottle neck comes into contact with the filling mechanism, allowing the liquid to fill the container until it reaches the vent tube, which controls the final level.
It is widely used for still water, clarified juices, vinegars, and other non-carbonated beverages.
Carbonated beverages.
2. Isobaric Filling (Counter-Pressure)
In isobaric filling, the bottle is initially sealed against the filling valve. Then, CO₂ or N₂ is injected until the internal pressure of the packaging equals the pressure of the product tank. Only after this equalization is the filling valve opened, allowing the liquid to flow without turbulence. At the end of the process, a slow decompression (snifting) is performed to prevent excessive foam formation.
This technology is indispensable for beers, soft drinks, carbonated waters, and sparkling wines.
3. Volumetric Piston Dosing
The system uses a precision cylinder that aspirates a pre-defined volume of product and then transfers it to the container by means of a servomotor or pneumatic actuator. The anti-drip valve ensures clean and precise filling.
It is suitable for creams, sauces, oils, syrups, and high-viscosity products.
4. Flow Metering
Each valve has an individual flow meter. In mass flow (Coriolis) systems, the mass of the fluid is measured directly; in electromagnetic systems, the volume is determined based on electrical conductivity. The controller automatically stops filling when the programmed value is reached.
Among its main advantages is filling without mechanical contact between the valve and the neck (contactless), facilitating automatic CIP cleaning and SIP sterilization operations.
5. Weight Metering
In this method, each package remains supported on a load cell during filling. The weight is continuously monitored, allowing the flow to be stopped exactly when the programmed mass is reached.
It is especially suitable for aggressive chemicals, agricultural pesticides, and high-value-added lubricants, as it eliminates errors resulting from density variations caused by temperature.
6. Vacuum Filling
A pump generates a partial vacuum inside the glass bottle, creating a pressure difference that draws the liquid up to a level previously defined by the filling tube.
This system is mainly used in the perfume, liquor, and premium beverage industries, where visual uniformity of the filling level is a quality requirement.
7. Peristaltic Pump Dosing
Dosing occurs by compressing a flexible tube with rotating rollers. Since the product remains exclusively inside the tube, contact with the machine's mechanical components is eliminated.
This technology is widely used in the pharmaceutical industry for filling eye drops, vials, and other sterile products, meeting GMP and FDA standards.
Block Architectures and Integrated Modules
Integrating processes into a single structure reduces the factory footprint, decreases contamination risks, and eliminates mechanical bottlenecks resulting from the transfer of packaging between independent equipment. Depending on the degree of integration, filling machines can be classified into different architectures.
1. Classification by level of integration
The Uniblock (Standalone Filler) consists exclusively of the filling carousel. In this configuration, the bottle cleaning and capping steps are performed by independent equipment, positioned at different points in the production line.
The Monoblock (2-in-1 – Filler-Capper) integrates, in a single piece of equipment, the filling carousel and the capping tower, synchronized by a transfer star. This configuration is widely used in the cosmetics, chemical, and food industries that do not require rinsing immediately before filling.
The Triblock (3-in-1 – Rinser-Filler-Capper – RFC) represents the most widely used architecture in the beverage industry. The rinsing or cleaning of the bottles, product dosing, and capping steps are integrated into a single structure, ensuring high productivity and reduced handling of the packaging.
The Quadriblock (4-in-1) incorporates an additional decontamination step before rinsing, using agents such as peracetic acid, ozone, or steam for thermal sterilization. This configuration is essential for sensitive beverages, NCF (Not From Concentrate) juices, and dairy products processed in ultra-clean or aseptic systems.
Combi Systems (Blow-Fill-Cap – BFC) directly integrate the PET preform blow molding machine into the filling and capping system. Since the bottle is formed, sterilized by the blowing process itself, and immediately sent to filling, the need for a rinsing module and intermediate air conveyors is eliminated, significantly reducing energy consumption and the space occupied by the line.
2. Integrated Operational Modules
Rinser Module
The rinse module uses rotating grippers that hold the packaging by the neck (neck handling) and invert it approximately 180°, positioning it over the washing nozzles.Depending on the application, different sanitizing media can be used, including filtered water, sterile water, ionized air for particle removal and neutralization of electrostatic charges, ozone, or sanitizing solutions such as peracetic acid.
Closure Modules
Closure systems can assume different configurations depending on the type of cap used.
Towers with magnetic hysteresis clutches are designed for the application of continuous screw plastic caps, such as the PCO 1881, 28 mm, and 38 mm standards. Torque control is precise, reducing the risk of damage to the packaging threads.
ROPP (Roll-On Pilfer-Proof) crimpers use forming rollers to mold aluminum caps directly onto the necks of glass bottles, and are widely used in the wine and spirits industries.
Crown cork type capping machines apply crown-type metal caps, typically in diameters of 26 mm and 29 mm, used on beer and soft drink bottles.
Specific towers can also be incorporated for the automatic insertion of stoppers, droppers, spray valves, and dosing pumps, using vibratory feeding and positioning systems.
As a complement to the closing process, modules for electromagnetic induction sealing of aluminum discs and automatic shrink sleeve applicators can be installed.
Chapter 6 – Production Scales and Nominal Capacity Ranges
The production capacity of a rotary filling machine is mainly determined by the number of filling valves and closing heads installed on the carousel, as well as by the characteristics of the product, packaging, and technology employed.
Low and medium speed lines have a nominal capacity between 1,500 and 6,000 bottles per hour (BPH). These lines are typically used by pharmaceutical industries, cosmetics manufacturers, specialty chemicals companies, and craft breweries. In this range, monoblock systems equipped with approximately 6 to 16 filling valves predominate.
High-speed lines operate between 6,000 and 24,000 BPH, serving medium and large-sized industrial plants for filling sauces, edible oils, lubricants, cleaning products, juices, and other liquid foods. They generally employ triblock systems with about 18 to 48 filling valves.
Ultra-high-speed lines exceed 24,000 BPH, and can reach or exceed 72,000 bottles per hour, depending on the equipment configuration. These lines are characteristic of large manufacturers of mineral water, soft drinks, beers, and other high-volume beverages, using quadblock systems and Combi systems equipped with approximately 60 to more than 120 filling valves.
Global and National Mapping of Manufacturers and Models
The global market for rotary filling machines is comprised of manufacturers specializing in different industrial segments, from large-scale beverages to high-precision pharmaceutical and chemical applications. Supplier selection depends on production capacity, level of automation, filling technology, and industry regulatory requirements.
Manufacturers for large-scale beverage and food production
Krones, from Germany, is one of the world's largest manufacturers of bottling and packaging equipment. Among its main product lines are the Modulfill filling machines, in the VFS, HES, and NW series, as well as the integrated Contiform 3 Speed Combi system. Its equipment operates at capacities of approximately 10,000 to 90,000 bottles per hour (BPH), and is widely used in the beer, soft drink, mineral water, juice, and dairy segments.
Sidel, part of the Tetra Laval Group, develops equipment such as SuperCombi, Matrix SF100/FM, and EvoFILL, with capacities ranging from 15,000 to 80,000 BPH. Their solutions primarily serve the production of mineral water, carbonated soft drinks (CSD), edible oils, and sensitive juices.
GEA Group offers equipment such as ECOFILL, VIPoll Visitron, and Aseptic Blow Fill Cap systems, mainly intended for the aseptic dairy, industrial and craft beer, and NCF (Not From Concentrate) juice industries. Capacities range approximately from 6,000 to 60,000 BPH.
SACMI, a traditional Italian manufacturer, produces the AWS, BloFill, and Opera lines, with capacities between 12,000 and 72,000 BPH, mainly focused on bottling mineral water, soft drinks, and other non-alcoholic beverages.
CFT Group, currently part of the Coesia Group, supplies equipment such as the Master RS and Master C-PET, with capacities ranging from 3,000 to 40,000 BPH. Their systems are widely used in the packaging of tomato paste, sauces, beers, and juices with pulp.
Manufacturers for the pharmaceutical, cosmetic, and chemical sectors
Syntegon, formerly Bosch Packaging Technology, develops equipment from the FLT, FVR, and MDR series, intended for packaging Injectables, vials, syrups, and eye drops, meeting GMP and FDA standards. Their production lines have approximate capacities between 2,000 and 36,000 BPH.
The Marchesini Group produces equipment such as the ML661, Nastro, and Steril, mainly used in the manufacture of premium cosmetics, perfumes, and liquid medications, with capacities between 1,500 and 24,000 BPH.
The IMA Group offers solutions such as Sterifill and the FLX Series, focused on the filling of nutraceuticals, oral suspensions, and hospital sanitizers, operating at capacities of approximately 3,000 to 30,000 BPH.
National Manufacturers
In the Brazilian market, manufacturers specializing in solutions adapted to the needs of the national industry stand out.
Zegla Máquinas produces equipment such as the ZT Isobaric Triblock, the ZM Monoblock, and the ZG Gravity Filling Machine, with capacities ranging from 2,000 to 36,000 BPH. Their equipment is designed for filling beers, soft drinks, mineral water, spirits, and vinegars.
ZL Máquinas manufactures the ZL-MR Rotary Monoblock and ZL Volumetric Dosing systems, primarily serving the cosmetics, cleaning products, and chemical industries. Capacities range approximately from 1,500 to 12,000 BPH.
Linsmar, together with Mastercorp, offers equipment such as the ERL Rotary Filling Machine and monoblocks equipped with piston feeders. These solutions typically operate between 1,000 and 8,000 BPH and are used for filling lubricants, cleaning products, and viscous foods. Chapter 8 – Multilingual Technical Glossary and Terminology for B2B SEO
Standardizing technical terminology facilitates communication between manufacturers, integrators, suppliers, and international clients, as well as improving the indexing of technical content in search engines focused on the B2B market.
The term Rotary Filling Machine corresponds, in English, to Rotary Filling Machine or Rotary Filler, while in Spanish it is called Llenadora Rotativa or Envasadora Rotativa. Among the most used keywords in technical searches are rotary liquid filling machine, rotary filler, and rotary bottling machine.
The Rotary Capping Machine is known internationally as Rotary Capping Machine or Rotary Capper, and in Spanish it is called Tapadora Rotativa or Roscadora. The main search terms include rotary screw capping machine, rotary capper, and bottle capping equipment.
Unibloco corresponds to the term Standalone Rotary Unit in English and Unidad Independiente or Monobloque Simple in Spanish. In technical research, expressions such as standalone rotary filler and single block rotary machine stand out.
The Monoblock, which integrates filling and capping, is internationally known as Monoblock (Filler-Capper), maintaining a similar nomenclature in Spanish (Monobloque). Among the main search terms are monoblock filler capper and 2 in 1 monoblock bottling machine.
The Triblock (Rinser-Filler-Capper – RFC) is known in English as Triblock Rinser-Filler-Capper and in Spanish as Tribloque Enjuagadora-Llenadora-Tapadora. The most used keywords include triblock bottling machine, 3 in 1 triblock, and rinser filler capper.
The Quadblock is frequently called Quadblock Packaging System in English and Cuadribloque de Envasado in Spanish. Among the most used expressions in search engines are 4 in 1 rotary filling machine and quadblock system.
Finally, Combi Systems (Blow-Fill-Cap – BFC) are internationally known as Blow-Fill-Cap Combi Systems and, in Spanish, Sistema Combi Soplado-Llenado-Tapado. The main related keywords include blow fill cap combi machine and combi block bottling machine. |
|
|
|
 |
Brand: Bausch
Rotary filling machine with sealer and depyrogenation and sterilization tunnel for injectable glass ampoules in 316L stainless steel.
Comprises:
- Automatic rotary filling machine and sealer for glass ampoules for human injection lines.
Manu... |
|
|
 |
Brand: Bausch
Automatic rotary filling and sealing machine for glass ampoules for human injection lines.
Manufacturer | Brand: Bausch.
Model: 506.
Year: 2022.
Nominal production capacity: up to 24,000 items per hour, depending on the ampoule size.
E... |
|
|
 |
Beer bottling line, consisting of depalletizing, conveying, rinsing, filling, can seamer and level inspection.
Depalletizing machine for cans per hour.
In-line conveyor.
Mezzanine walkway.
Rotary filling machine for carbonated beer.
Wi... |
|
|
 |
Brand: Delgo
Stainless steel rotary dosing machine for containers, glasses, and liquids.
Manufacturer | Brand: Delgo.
With automatic sealing for aluminum seals.... |
|
|
 |
Brand: Nelpas
Volumetric rotary piston filler for filling small bottles.
Manufacturer: Nelpas.
Piston volume: 100 ml.
Minimum capacity: 30 ml (to be confirmed).
Automatic filling equipment with 4 mechanically driven dosing pistons.
Pneumatic automat... |
|
|
 |
Brand: Delgo
Components: WEG
Automatic rotary stainless steel filling, dosing, and sealing machine for aluminum seals for jars and bottles.
Manufacturer | Brand: Delgo.
Model: DG 545.
Includes filling tower*, aluminum seal application, and seal fusion.
*Potential pre... |
|
|
 |
Brand: Vinox, Zegla
Rotary gravimetric filling machine in stainless steel, enclosed.
Manufacturer: Vinox / Zegla.
Estimated production:
For the 5 L format, 2,000 to 2,500 units per hour, depending on product viscosity, nozzles, characteristics, and foam.
For... |
|
|
 |
Components: WEG
Rotary filling machine with 12 nozzles and screw capping machine.
For 500 ml PET bottles.
Filling nozzles with return.
With cap feeder for plastic caps.
Equipment already reviewed by Sigma Machines.
With pump and panel.
Components:
... |
|
|
 |
Brand: Fabrima, Masipack
Stainless steel filling machine for plastic tubes.
Manufacturer: Fabrima.
Model: EBF 100.
For the manufacturer's catalog click here
... |
|
|
 |
Brand: Delgo
Components: Atos, Bonfiglioli, Festo, Moeller, Steck, WEG, Wesen
Dosing filling machine for bottles, flasks and pots for beverages and yogurt.
Brand: Delgo.
Model: MON - L.
Year: 2012.
Dosing system by volumetric cylinder and pneumatic force.
With aluminum seal applicator.
Estimated production: 2... |
|
|
 |
Brand: Imacal, Wada
Rotary filling with 12 automatic nozzles.
Brand: Wada, Imacal.
Model: Mr 12.
Double conveyor belt.
In stainless steel.
... |
|
|
 |
Brand: Glória
Soda machine.
The equipment in question is used, as is.
Brand of equipment: Glory
production Details:
production: 200 packs per hour.
Number of employees: from 06 to 08 people.
Infrastructure: mt 10 x 20 Mt.
equipment details:
1 Fi... |
|
|
 |
Brand: Martinez taboada
Filling machine for vials and flasks with stopper.
Brand: Martinez Taboada.
Model type: Ife 77.
Makes up to 30 ml.
Year: 1979.... |
|
|
 |
Brand: Zegla
Monobloc filling machine with cabin, made of stainless steel.
Manufacturer: Zegla.
Model: RZ - RET 24 / 30 / 05 GR.
Year of manufacture: 2013.
Rinser with 24 positions/grippers for washing PET bottles with tumbling and water jet.
Rotar... |
|
|
 |
Brand: Sidel
Small-scale production line ideal for start-up companies, market testing, or R&D laboratories for formulation, testing, quality control, product improvement, and development.
Paddle mixer for soap paste with stainless steel interior and painted ex... |
|
|
 |
Semi-automatic filling machine for jars with aluminum lids.
Manufacturer/brand: NTI.
Approximate dimensions:
Height: 1.70 m.
Width: 1 m.
Length: 1 m.
Jar diameter: 100 mm.... |
|
|
 |
Brand: BBULL TECHNOLOGY, Zegla
Complete filling line for cans of juices and still drinks.
For Hot Fill cans with nitrogen application.
Manufacturer | brand: Zegla.
Year: 2010 / 2011.
Approximate filling capacity: up to 6000 cans / hour.
Line composed of:
- Depall... |
|
|
 |
Brand: Serac
Rotary filling machine for bottles with aluminum seals.
Manufacturer brand: Serac.
Current format: 160 / 180 ml.
Production: 270 thousand bottles per hour.... |
|
|
 |
Brand: Grupo Innovar, Innovar
Rotary carousel dosing and filling machine with automatic sealer and capper for jars, cups, and bottles.
Manufacturer | Brand: Innovar.
For jars with a diameter of 100 mm.
With aluminum seal and automatic capping.
Approximate production: ... |
|
|
 |
Brand: Mirainox
Automatic stainless steel rotary filling and capping machine for cups and jars for dense, pasty products.
Manufacturer | Brand: Mirainox.
Model: CG 1.800 FBPR-E.
Approximate production: 1,800 to 2,400 jars per hour.*
*Depending on the pro... |
|
|
 |
Brand: Ultramaq
Stainless steel carousel stand-up pouch packaging machine.
Manufacturer | Brand: Ultramaq.
For packaging olives (or preserves) and solid products.
With possible brine dispensing via a dispensing nozzle (optional).
With digital touchscreen... |
|
|
 |
Brand: Erli
Rotary liquid filling machine with 4 pistons for small bottles and jars.
Manufacturer | Brand: Erli.
Model: EAT4.
Approximate capacity: 14,400 units per hour.
Year: 2002.
Equipment in excellent condition, ready for use.
With accesso... |
|
|
 |
Brand: Brasholanda
Rotary filling machine with 8 nozzles in 316L stainless steel.
Manufacturer | Brand: Brasholanda.
Approximate capacity: 4,000 to 6,000 bottles/jars per hour.
For jars from 100g to 3,000g.
Can fill corrosive products.
Solid structure in... |
|
|
 |
Brand: Zegla
Automatic rotary filling machine with 15 filling nozzles, capping head, and rinser.
Manufacturer | Brand: Zegla.
Model: RZ-RET 15/15/4 GR.
Approximate capacity: up to 4,000 750 ml bottles per hour.
Year: 2010.
Closure | capping: by nut... |
|
|
 |
Brand: Inkjet, Milainox
Automatic rotary dosing, sealing, and capping machine with date coder.
Manufacturer | Brand: Milainox.
Model: MB - 1 CUSTOM.
Year: 12/2023.
Jar diameter: 68 mm.
Aluminum seal diameter: 75 mm with cap and attached spoon.
Equipped wit... |
|
|
 |
Brand: Brasholanda
Rotary volumetric filling and dosing machine in stainless steel for cups, bottles, and jars.
With aluminum seal and capping unit.
Approximate capacity: up to 2,000 units.
For filling products such as cream cheese, butter, dulce de leche, dai... |
|
|
 |
Brand: KHS, Zegla
Rotary filling machine with 42 filling nozzles in stainless steel for carbonated beverages with gas.
Manufacturer | Brand: KHS.
Configured to work with 2-liter bottles.
Includes kit for 1-liter bottles.
Approximate filling capacity: over ... |
|
|
 |
Brand: IMSB, Robopac
Rotary filling machine for liquid or low-viscosity products.
Brand/Manufacturer: IMSB (now Robopac).
Model: ECCT 18 12/06.
Features 12 filling nozzles with individual load cells.
With automatic threading.
Features a cap feeder conveyor... |
|
|
 |
Brand: Brasholanda
Pot filling machine with aluminum seal sealer.
Rotary stainless steel tabletop filling, dosing, and sealing machine for pots, cups, and bottles.
Manufacturer | Brand: Brasholanda.
Approximate productivity: up to 1,700 units per hour.
For ... |
|
|
 |
Brand: Serac
Rotary filling machine in stainless steel with 8 filling nozzles for liquids.
Manufacturer | Brand: Serac.
Approximate capacity for 260 ml: 6,100 units per hour.
Approximate capacity for 880 ml: 3,300 units per hour.
For liquids, fluids, ... |
|
|
 |
Brand: Apema, Fabrinox, Zegla
Line for carbonated, carbonated, and energy-drinking beverages.
For 2-liter PET bottles.
Approximate capacity: up to 3500 liters per hour.
Composed of:
- Rotary filling machine with 24 nozzles.
Manufacturer | Brand: Fabrinox.
- Capp... |
|
|
 |
Brand: Delgo
Rotary filling machine for pastes, creams, sweets, dairy products.
Manufacturer | Brand: DELGO.
Model: 2000.
Approximate productivity: 1500 to 2000 jars/hour.... |
|
|
 |
Brand: TecnoClima
Canning line for carbonated and non-carbonated beverages.
For 269 ml, 350 ml, 355 ml and 473 ml cans.
Composed of:
- Carbonator with tank pump and heat exchanger.
Approximate capacity: up to 3,000 liters per hour.
- Stainless steel thr... |
|
|
 |
Brand: Delgo, Motomil
Components: Coel, Emeco, Festo, Igus, Onrom, Schmersal, Schneider, SEW, Wenglor
Volumetric filling machine with stainless steel sealer and capper for jars and bottles.
Manufacturer | Brand: Delgo.
Model: DG-2000.
Approximate capacity: 1,200 to 2,000 jars per hour.*
*Depending on the product to be filled.
Approximate... |
|
|
 |
Brand: IMSB, Maqmundi
PET bottle filling line with bung capper, labeler, and accumulator table.
Comprises:
- Stainless steel rotary gravimetric filler with 16 nozzles.
With bung capper.
Manufacturer | Brand: IMSB / Rodopac.
Model: EGT8 16 / 4.
Approximat... |
|
|
 |
Brand: CompoMaq
Rotary stainless steel filling machine with 30 nozzles.
Manufacturer | Brand: CompoMaq.
For carbonated soft drinks.
For 500 ml, 1500 ml and 2000 ml bottles.
With cap feeder and screw capping machine with 8 heads.
Previously used for so... |
|
|
 |
Brand: CompoMaq
Rotaviva filling machine with 42 nozzles and an 8-head screw capper.
Manufacturer | Brand: CompoMaq.
For bottles from 600 to 1000 ml.... |
|
|
 |
Brand: APV, Cleaver-Brooks, Filtec, Ingersoll Rand, KHS, STEINECKER, Ziemann Liess
Complete Brewery Factory.
Approximate capacity: up to 10,000 bottles/hour for 600 ml bottles.
Equipment set for malt and gritz treatment, consisting of:
- Reception, cleaning and weighing.
Manufacturer | brand: ZIEMANN LIESS (Brazil).
... |
|
|
 |
Brand: IMSB
Stainless steel rotary gravimetric filling machine with 16 spouts.
With bung capper.
Manufacturer | Brand: IMSB / Rodopac.
Model: EGT8 16 / 4.
Approximate maximum nominal speed: 6,000 units/hour.*
*For 500 ml and 750 ml bottles.
Speed... |
|
|
 |
Brand: Engafbras
Automatic rotary filling machine in stainless steel with 9 monobloc nozzles for liquids.
Liquid filling line with conveyor belts, container rinsing, filling, corking and capping.
Manufacturer/brand: Engafbras.
Approximate capacity: 2,500 lit... |
|
|
 |
Rotary filling machine with 48 nozzles.
Year: 1993.
The equipment has been adapted.
It was used for cachaças and alcoholic cocktails.... |
|
|
 |
Brand: Japa Componentes
Stainless steel filling machine with 11 nozzles and cork stopper.
Manufacturer/brand: Japa components.
Filling machine model EVR 11-1.
Year: 2014.
For 1500 ml, 3000 ml and 4600 ml bottles.
Cork capper model RLH1.
Year: 2013.
It w... |
|
|
 |
Automatic rotary filling machine with 36 nozzles for bottles and glass jars.
For 600 ml glass bottles.... |
|
|
 |
Rotary automatic filling machine for soft drinks with 72 nozzles.
For manufacturing carbonated (carbonated) drinks.... |
|
|
 |
Brand: KHS
Rotary filling machine for carbonated beverages, monobloc, in stainless steel, with 80 valves and filling nozzles.
It has 14 capping valves for Rollon 28 caps.
Manufacturer/brand: KHS
Model: Delta VVF 80/14.
The equipment can be sold as i... |
|
|
 |
Brand: KHS, Mojonnier, Sabroe, Schulz, Ziemann Liess
Complete line plant for the production of beer and soft drinks.
Line composed of:
Bottle washer.
Manufacturer: Ziemann-Liess / KHS.
With 32 positions.
Year: 1994.
With tank system.
Linear rinser for bottles.
Nominal production... |
|
|
 |
Brand: OCME, ROMI, Sidel
Bottling line for mineral water.
Line composed by the main equipment:
Pet bottle blower.
Manufacturer: Roma.
Filling and capping system for pet bottles.
Manufacturer: Sidel.
Rotary labeller.
Manufacturer: Sidel.
Model:... |
|
|
 |
Brand: Arbras
Filler filling machine 32 filling nozzles.
Manufacturer: Arbras.
Model: M2F-32-PP.
Approximate productivity: up to 12,000 vials/hour.
With 8 capping arms.
Worked with vinegar.... |
|
|
 |
Brand: Edward
Automatic rotary filling machine 20 nozzles with gravity filler and closing machine.
Brand: Edward.
Approximate capacity: 500 ml.
Year: 2019.
It has:
Dosage control via level.
01 central tank for feeding with level control.
01 li... |
|
|
 |
Filling 20 rotating nozzle for liquids. Ideal for filling, bottling soda syrup, juice Pack and fill bottle of soda, among others.... |
|
|
 |
Brand: Pack R
2
Rinsers Machines N° series: 98034
01/1999 Manufacturing
v
400 Volts Frequency 60 Hz
Amps
12 v. 8000V. The
air pressure 6 Bar... |
|
|
 |
Brand: Holstein Kappert
* Tampador * head * 12 k12k Holstein * Year 1985 ... |
|
|
 |
Brand: Velluto Rebelo
Vacuum filling machine 40 nozzles with cork stopper 6 nozzles.
Brand: Velluto Rebelo.... |
|
|
 |
Brand: Milainox
Filler for pastes.
Manufacturer: Milanox.
For packages from 150 g to 1 kg.
Approximate production: up to 1500 pots per hour.
Stainless steel and aluminum machine.
For jellies, garlic paste, butter, curd cheese, guava paste, among other... |
|
|
 |
Brand: KHS
Rotary filling for glass bottles.
Brand: KHS.
Model: Innofill 120/18.
Production: 40,000 bottles per hour.
With vacuum pump.
KHS line labeler available.
Origin: Kaiser.... |
|
|
 |
Brand: KHS
Industrial rotary filling machine.
Brand: KSH.
Model: VF 80/14/14 RP.
Production capacity: 12 thousand bottles per hour.
Current format: 2,000 ml.... |
|
|
 |
Brand: Mesal
Rotary filling machine for non - carbonated products.
Brand: Mesal.
Year: 2013.
With 20 nozzles, gravimetric.
In 304 stainless steel.
Production: 14,000 units per hour.... |
|
|
 |
Brand: Serac
Rotary filling machine.
Brand: Serac.
Monoblock.
With 8 pistons up to 500 ml.
Italian head for 31.5 mm pilfer proof aluminum seals.... |
|
|
 |
Brand: Krones
24-piston rotary filling machine.
Brand: Welba Krones.... |
|
|
 |
Brand: Velutto Rebello
32 nozzle rotary filling machine.
Brand: Velutto Rebello.
Worked with cans.... |
|
|
 |
Brand: West equipamentos
Tri-block rotary filling machine.
New machine.
Brand: West Equipment.
With washing rinser, container and capping.
Cabin equipment made of AISI 304 stainless steel.
Capacity: 2,500 units / h, speed varies according to format and product... |
|
|
 |
Brand: Krones
Krones 24 filling nozzles.
18000 bottle production capacity/hour.
With load cell.
Note: This ready for filling oil.... |
|
|
 |
Brand: Imdec
Filling with 12 heads.
Brand Name: Imdec.
Model: D-613.
Capacity 200 bottles per minute.... |
|
|
 |
Brand: Holstein Kappert
Filler and Capper.
Brand name: Holstein Kappert.
Model: KHS VF 60/10.... |
|
|
 |
Brand: Arbras
Filling Arbrás with tampador automatic with 12 nozzles
quantity: 1 unit
manufacture: 2000... |
|
|
 |
Brand: Gava, Rotat
Wine distillation machine.
Brand: Gava.
Garola / Concealer.
Rotat packaging machine with 12 nozzles.
Filter with 70 plate.
3 units of 2,000 liter tanks.
Tank of 2,500 liters.
Semi Automatic Strapping Machine.
Pump / Centrifuge... |
|
|
 |
Brand: Gualapack
Automatic stand up pouch filler for liquid or pasty products.
Manufacturer brand: Gualapack.
Model: CHP-2H.
Year: 2020.
Production: 80 units/minute with 110 ml of water, may vary depending on product and operating conditions.
Pre-forme... |
|
|
 |
Components: Bonfiglioli, WEG
Automatic filling machine for product and cosmetic bottles.
With 3 volumetric filling pistons.
With 3 screwing arms for bottle caps.
Bottle input conveyor with 3 guides.
Bottle exit conveyor.
It has a motor and conveyor reducer.
Wit... |
|
|
 |
Brand: IMSB, Rodopac
Gravimetric filling machine with 40 nozzles.
Brand: IMSB.
Model: EGT8.40/12.
Anp: 2016.
It was used for chlorine.
With capper.
Voltage: 220V.... |
|
|
 |
Brand: Delgo
Bottle cups filling machine with aluminum seal.
Brand: Delgo.
Model: MON-L.
Year: 2012.
Current format: 180 ml to 250 ml bottles.
Stainless steel equipment.
Volumetric filling with pneumatic cylinder.... |
|
|
 |
Brand: Tecman, Wada, Zanasi
Components: Helishun, Norma, OMRON, Siemens, Steck, THS, Voges, WEG, Weidmuller
Complete filling line, with bottle lungs, bottle feeder, filling machine, threading machine and output accumulator table.
Brand: Tecman.
Year: 2014.
Stainless steel cabin equipment.
Current formatting (estimate): cylinders with 500 ml.
... |
|
|
 |
Brand: Vinox, Zegla
Components: Allen-Bradley, Danfoss, DeviceNet, Phoenix Contact, Siemens, Ventisilva, WEG
Rotary refrigerated filling machine.
Brand: Vinox Zegla.
Model: Quadriblock, VX Reet.
Year: 2012.
Cabin equipment, with cooling of the internal filling atmosphere.
With CIP system.
Gravimetric load cell filling with individual nozzl... |
|
|
 |
Brand: Milainox
Automatic filling and sealing machine.
Brand: Milainox.
Model: M22 - Plus.
Mechanical timing.
Weldable heat sealing.... |
|
|
 |
Brand: Cosmar, Omas
Components: Emerson, Festo, Legrand, REO Elektroniki, Siemens
Line for aerosol filling machine.
Aerosol filling machine.
Brand: Cosmar Italiana.
Model: MR - PN / 18.
Automatic selection and insertion of caps on to the cans.
Brand Name: Omas Tecnosistemi.
Model: G-250.
Year: 2011.
Compone... |
|
|
 |
Brand: IMSB, Rodopac
Components: Siemens
Stainless steel monobloc/tribloc filling machine.
Brand: IMSB.
Model: ERSB 1414/4.
Manufacturing Standard: MS.
Electrical Characteristics: 380 V.
Weight: 3.200 KG.
With 14 filling nozzles.
With 4 arms for threading caps.
With ... |
|
|
 |
Brand: Delgo
Components: Festo, Norma, Steck, WEG
Rotary filling machine and capper for glue, or pasty viscous products.
Brand: Delgo.
Stainless steel machine.
Formats and stars for 40 g, 80 g and 90 g.
The system works with only one star, the format change is practical.
For glue jars... |
|
|
 |
Brand: Promáquina
Components: CompAir, Danfoss, Nivetec, NTG, Starnox, WEG
- Complete packaging for pharmaceutical industry.
- Machine built in stainless steel.
- To pack medicine with droppers and cap.
- Complete system for:
- Feed the liquid, with lung tank and agitator to avoid decantation.
- Pump for the ... |
|
|
 |
Brand: Bauch Campos, Delgo, Novelprint
Line for the manufacture of glue and packaging of 40 g / 90 g / 500 g / 1000 g consisting of:
- Mixer without shirt for glue and solution.
- Mixer with jacket and heating to make alcohol solution poliv.
- Automatic packaging machine, year 2013.
... |
|
|
 |
Brand: Mesal
Filling Machine.
Brand: Mesal .
Model: E30G2.
Approximate production: 9,000 bottles / hour.
500 ml PET bottle.... |
|
|
 |
Brand: Martinez taboada
Rinsers of flasks.
Brand: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.... |
|
|
 |
Brand: LCB
Filling Large.
automatic Rotary Filling mark LCB. filling nozzles 16.
Manufactured in stainless steel AISI 304
vacuum System, suitable for glass containers or bottles.
Packs any 1000 ml bottles to model.
approximately 8000 bottles productio... |
|
|
 |
Brand: Martinez taboada
Rinsers of vials and flasks.
Mrca: Martinez Taboada.
Makes up to 30 ml.
type Model. IFE 77.
Year. 1979.
the machine was being used all the time, is in a State of preservation as the machines of the perfume line.... |
|
|
 |
Brand: LCB
Stainless steel rotary filling machine.
Brand: LCB.
With 16 filling nozzles.
Estimated production: 6000 bottles per hour, varies according to product, nozzles, volume, environmental and operational conditions.
Stainless steel AISI 304.
... |
|
|
 |
Brand: Zegla
Complete bottling line for carbonated soft drinks.
Manufacturer | Brand: Zegla.
Approximate capacity: 2,400 bottles/hour.
Formats: for 500 ml and 1.5 liter bottles.
Rotary stainless steel filling machine with 30 nozzles.
With screw cap... |
|
|
 |
Brand: Narita, VMC Máquinas
Complete line for bottling mineral water, carbonated or still drinks.
Manufacturer | Brand: VMC Máquinas.
For 500 ml bottles.*
*Can be used for up to 2 liters.
Composed of:
- Inlet air vents that leave the blower* and go to the filler.... |
|
|
 |
Brand: Narita, VMC Máquinas
Complete 20-liter water bottling line.
Comprising:
- Rotary bottle filler for 20-liter bottles.
Manufacturer | Brand: VMC Máquinas.
Approximate capacity: 1,600 to 1,800 gallons per hour.
- Washer-rinser for gallons with 10 wash stages.... |
|
|
 |
Brand: Ronchi
Components: Barford
Complete packaging line from the feeding process to palletizing.
Line composed of:
- 6-meter long feeding conveyor belt.
- Cap feeder with elevator.
Approximate capacity: up to 12,000 units/hour.
- Rotary filling machine with 30 piston... |
|
|
 |
Components: Delta
Stainless steel rotary filling and sealing machine for coffee capsules.
Approximate capacity: 30 units per minute.
Year: 2022.
Manufacturer: Chinese.
Year: 2022.
The equipment will be available for sale in January 2025.
Delta HMI pa... |
|
|
 |
Brand: Zegla
Automatic rotary filling machine in stainless steel with 18 nozzles.
Manufacturer/brand: Zegla.
Year: 2013.... |
|
|
 |
Brand: Ablimak
Automatic stainless steel rotary dosing filler.
For plastic and glass cups with automatic closing.
Manufacturer/brand: Ablimak.
Model: Girus C 2500.
Approximate nominal production: from 1600 to 2500 packages per hour.
Packaging: glass ... |
|
|
 |
Brand: Bramak
Components: Delta
Automatic rotary filling machine in stainless steel for açaí jars.
With sealer and lid for açaí jars.
Sealing with aluminum seals.
Manufacturer: Bramak Máquinas Envasadoras.
Model: C5.
Approximate capacity: up to 2200 pots per hour.
... |
|
|
 |
Brand: Erli
Automatic rotary filling machine.
With 3 dosing nozzles and 3 threaders.
Manufacturer: Erli.
Model: EAT-3.
Year: 2008.
Bottle volume: up to 500 ml.
Approximate production: up to 2400 vials / hour.
Engine: 1 hp.
Voltage: 220V.... |
|
|
 |
Brand: Milainox
Rotary filling machine with cup sealer and date stamp.
Manufacturer: Milanox.
Model: M22 Plus.
Year: 2022.
For glasses from 200 ml to 300 ml.
With automatic stainless steel accumulator table.
Nominal output: 3000 units per hour.
... |
|
|
 |
Brand: KHS, Mojonnier, Posimec, Zegla
Complete line for the manufacture of carbonated beverages (with gas), including soft drinks, energy drinks, juices, alcoholic beverages.
Complete syrup with stainless steel tanks.
Carbon dioxide storage and pumping system for 8,000 kg.
Water... |
|
|
 |
Brand: Apitec
Filling line for honey.
Manufacturer: Apitec.
Year: 2012.
Line for packaging honey in flasks from 600 to 1,200 ml.
Average production: Depends on the format, product, bottle, environmental and operational conditions, it is estimated from ... |
|
|
 |
Brand: Tambflex
Gravity cup filling machine for liquids with aluminum seal.
With sealer and date stamp.
Manufacturer: Tambflex.
For liquid products such as water, juice and others.
Approximate productivity: up to 1500 glasses per hour.
For glasses fro... |
|
|
 |
Brand: Milainox
Rotary filling machine with cabin and pot sealer for pasty products.
Manufacturer: Milanox.
With aluminum seal.
Approximate productivity: up to 1500 pots per hour.
For pots from 250 g to 500 g.
With volumetric dosing.
For jellies, g... |
|
|
 |
Brand: IMSB, Posimat, Rodopac
Gravimetric filling line.
Brand: IMSB.
Model: EGT 30/10.
Process: Bottle of liquid alcohol from 500 ml to 1 L.
Approximate production: 180 vials per minute.
Bottle positioner: Posimec year 2016.
WEIGHT: 3500 KG.
VOLTAGE: 220 VAC ... |
|
|
 |
Brand: IMSB, Rodopac
Gravimetric filling and threading machine with 20 nozzles.
Brand: IMSB (São Bento Mechanical Industry).
Model: EGT8 20/05-04.
Voltage: 220 V three-phase.
Year: 2005.
Approximate capacity: up to 6 thousand per hour.... |
|
|
 |
Brand: Milainox
Automatic dosing and sealing machine for cups, flasks and pots.
With accumulator table.
Brand: Milainox.
Model: M22 - Plus.
Year: 2010.
Estimated productivity: up to 2500 cups/hour.... |
|
|
 |
Brand: Codatec, GRC, Serac
Line for filling with 8 rotating nozzles corrocel.
Serac brand filling machine.
Codatec brand labeling machine.
Sealer brand GRC.
With mat and accumulator table.
Approximate capacity: 4000 litres/hour.
Previously bottled product: lu... |
|
|
 |
Brand: Robopac
Rotary filling machine 36 nozzles with capper.
Brand: Robopac.
Approximate production capacity: 9,900 bottles/hour.
It comes with a 01 liter bottle of alcohol and 500 ml of detergent.
Year: 2022.... |
|
|
 |
Brand: Dmom
Components: Festo, Siemens
Automatic volumetric rotary filling machine for pasty fruit jams with different pieces/fillings.
Brand: DMOM.
Model: DMS - 2000.
Approximate production: up to 2,000 pots per hour.
With jacketed tank with level control.
Sealing station ... |
|
|
 |
Automatic rotary filling machine.
With 30 filling nozzles.
Estimated production: 80 vials per minute.
For volumes from 0.5 L to 1.0 L.
Stainless steel equipment.... |
|
|
 |
Brand: Arbras
Automatic rotary filling.
With filling and threading.
With 28 filling nozzles and 8 threading arms.
Brand: Arbrás.
Worked with non-alcoholic drinks.
Production: 9,000 u / h, for 500 ml bottles, these values may change depending on the ... |
|
|
 |
Brand: Zegla
Rotary liquid filling machine.
Brand: Zegla.
Capacity: 200 u / h.... |
|
|
 |
Brand: Angelus, Grown Simplimatic, Pakmatic, Solbern
Complete line for can depalatization, rinser, filling, can rewriter, conveyor, chiller tunnel, baler, palletizer and strech wrapper.
More information get in touch.
Production: 42,000 u / h.
Depalletizer.
Brand: Grown Simplimatic.
Washe... |
|
|
 |
Brand: Vinox
Rotary filling machine.
Brand: Vinox.
Model: VX 0804.
To fill from 2 liters up to 5 liters.
Sandblasted SAE 1020 carbon steel frame, painted in epoxy and top coated in polished AISI 304 stainless steel.
PLC controlled mechanical drive ... |
|
|
 |
Brand: KHS, Zegla
Rotary filling machine.
In stainless steel.
Retrofitting: Zegla.
Brand: KHS.
Capacity 14/3 g.... |
|
|
 |
Brand: IMSB, Rodopac
Rotary filling machine.
Brand: IMSB.
Model: EGT8 16/4.
Maximum nominal speed: 6000 u / h for bottles of 500/750 ml, speed varies according to product specificity and operating conditions.
Year: 2010.
Made of 304 stainless steel.
Wit... |
|
|
 |
Brand: Calss, Mesal
Line for filling water with or without gas.
Monoblock hermetic packing.
Brand: Mesal.
Rinser Nicale 24 calipers.
Baler.
Brand: Calss.
Capacity: 1,000 u / h.... |
|
|
 |
Brand: Serac
Rotary filling machine, piston system, up to 500 grs, with threading machine, all in stainless steel, cabin, SERAC brand.... |
|
|
 |
Brand: Promáquina
Rotary filling machine with 60 filling nozzles.
Brand name: Promaquina.
System consisting of 60 filling nozzles, 12 capping heads.... |
|
|
 |
Brand: Serac
Automatic rotary filling system with 24 piston gravity.
Brand: Serac.
Weight control by mechanical monobloc scale system with automatic rotary 8-head rotary screwdriver.
Production up to 10,000 u / h.... |
|
|
 |
Brand: Krones
Rotary filling machine.
with 30 pistons.
Brand Name: Krones.
for semi liquid products with containers up to 1000 ml.
Container Limit: 1000 ml.
Maximum production: 10,000 u / h.
Semi-pastous packaging.... |
|
|
 |
Brand: Milainox
Rotary filling for cups.
For packaging and sealing cups.
For liquid products.
Brand Name: Milainox.
Model: M - 22.... |
|
|
 |
Brand: Arbras
Rotary filling machine rinser and capping bottle machine
Complete line for packaging.
Brand: Arbras.
With system of feeding bottles and lids.
Stainless steel.
Machine in acrinilo.... |
|
|
 |
Brand: Mirainox
Filler and rotary sealer.
For filling liquid, semi-pasty and pasty products in glasses, flasks and pots with aluminum seal.
Brand: Mirainox.
Model: CG 1800 PTE.
Year: 2015.
System with two nozzles.
Formats from 20 ml to 1000 ml.
... |
|
|
 |
Brand: Brasholanda, IMSB, Zegla
Complete line for production, pasteurization and packaging of juices, soft drinks, nectar and mixtures.
Average line capacity in the current layout: 3,000 L / H.
Line consisting of:
Tank for concentrated juice syrup, syrup.
- Stainless ... |
|
|
 |
Brand: Wada
Stainless steel filling machine.
With "batch" filling system.
Stainless steel machine.
Brand Name: Wada.... |
|
|
 |
Brand: IMSB, Rodopac
Filling machine in stainless steel.
Brand: IMSB.
With 50 nozzles of container.
With 18 wrappers for bottle closure.
An IMSB box feeder is part of the system.
Model: EPX2 - 300.... |
|
|
 |
Brand: Edward
Filling machine with automatic feed.
- To fill flaconetes.
- Mark: Edward.
- Machine built in stainless steel.
- With panel and electrical components.
- With lid and bottle feeder.
- Engine: Cestari
- Serial Number: 368.889
- ... |
|
|
 |
Brand: Huhtamaki Brasholanda
Filling line and integrated Capper pots to margarine, butter, vegetable cream.
Brand: Huhtamaki Brasholanda.
Year: 2005.
Model: BrasKop.
Production: 5,000 bottles per hour (Tooling for 500 g and 250 g).
... |
|
|
 |
Brand: Milainox
Components: Rockwell
Liquid preparation and filling line in glasses.
-production up to 3000 glasses per hour.
-Rockwell PLC controlled System with HMI.
-Filling and M22 Plus Milainox Capper.
-Automatic rotary filling Machine, makes, positions the saddle seal and ... |
|
|
 |
Brand: Incomaf
Components: Festo, OMRON
Automatic rotating dosing machine for cups, flasks and pots.
Brand: Incomaf.
Model: CP2000-BP.
Mounted on a reinforced structure, entirely in stainless steel 304.
Used for pasty products, dosing through a positive pump, with a production ... |
|
|
 |
Brand: Wada
Stainless steel Rotary filling for liquid and Pasty products.
With 6 filling nozzles and thread cutting and forming.
With electronic control of production and packaging.... |
|
|
 |
Brand: Macmundi, Projepack, Vinox
VINOX filler/Capper monoblock.
Vxetgr model 12/4.
For non-carbonated mineral water PET 510 ml and 1.5 litres.
3000 unit production per hour reference 510 ml.
Vacuum and tunnel Projepack conjugate.
SLT model-400/RE (electric tunnel) to pac... |
|
|
 |
Brand: Erli
Filling / Capping semiautomatic 6 pistons 150 ml for liquids.
Brand: Erli.
Rosqueador with 6 heads.
Production unit up to 5000 per hour.... |
|
|
 |
Liquid Filling 3 semi-automatic piston filling with up to 20 thousand rosqueador 3 heads with production up to 2000 / h.... |
|
|
 |
Brand: Fujimec, Serac
Filling set composed of feeder, positioner, filling and CSI:
-Filling/Csi:
Mark: Serac.
Model: DT8V8/360 FHT.
Year: 2000.
-indexing bottles:
brand name: Fujimec.
Model: Fujomax DEF 15-C 16343.
Year: 2003.
-Carrier/lift:
bran... |
|
|
 |
Brand: Kugler, Nalbach, Narita
Complete line for packaging of powder and granules in glasses.
consisting of:
-Filling of powder and granular brand Rotary Nalbach.
-Kugler brand produced by Alcoa until 120 bottles/min.
-trademark Narita Labeller with production of up ... |
|
|
 |
Brand: Kugler
Filling for powder products.
Mark Kugler.
great for powdered juices, coffee, milk powder, baking powder among others.... |
|
|
 |
Brand: Mesal
Monoblock filler/Rosqueador.
Mark: Mesal.
model: E40-12 g.
production: 19000 bottles/hour
500 ml pet Bottle
applications: mineral water, liquid wax, juices, energy drinks, vegetable oil and other non-carbonated liquids.... |
|
|
 |
Brand: Arbras
12 Enchedeira automatic nozzles with encapsulated coupled of Arbras.
For juice and mineral water and others.... |
|
|
 |
Brand: Nalbach
Rotary filling mark Nalbach for glasses, cans or bottles of 50 g, 100 g and 200 g
with mats and accessories.
210 uni/min Capacity.... |
|
|
 |
Brand: Arbras
Rotary potted for liquids.
Brand: Arbras.
With 12 nozzles.
Year 2000.
Used for fruit juice.... |
|
|
 |
Gravity liquid filling machine.
With 40 600 ml glass vat.
Each production 8,000 unit hours.
Great condition with new mat and panel.
Explosion proof motor.
All in stainless steel 316.... |
|
|
 |
Brand: IMSB, Rodopac
Liquid filling machine 12 positions.
Brand: IMSB.
Model: ERSB 12/4.
Capacity: 60 vials p m - 1000 ml.
Year: 2004.... |
|
|
 |
Brand: WCJ
Rotary automatic filling machine.
WCJ Brand.
32 nozzles.
All stainless steel.
With rotary accumulation table and vibratory feeder.
Mark Ronchi (Italian).
EXACT model.
28 Container nozzles.
8 Perfume dispensers.
8 Buffers.
... |
|
|
 |
Brand: WCJ
Automatic Rotary filling
WCJ Mark With 32 Nozzles
comes with rotating and feeder build-up table
vibratorio
... |
|
|
 |
Brand: Holstein Kappert, Hosten, KHS
Soft drink line.
01-filler 30/6.01-16.01-filler feeder hosten 08 Pistons,
01-2 .01 columns Gasifier-ro-51.01 labeller-hosten, labeller, conveyor belts,
stainless tanks reducers and other parts.
... |
|
|
 |
Brand: Albermaq
Pasteurized milk in Line equipment package
-
Filling machine model: automatic Filling Machine Model Prepac 12000 5 Nozzles
capacity: 12000 liters per hour
Albermaq
manufacturer: year of manufacture: 1992
voltage: 3N * 380/220V 60 Hz
-can... |
|
|
 |
Brand: Wada
Rotary filling machine for bottles.
Brand: Wada.
Stainless steel.
... |
|
|
 |
Filling machine for creamy products.
- Made of stainless steel.
- Rotating.
- It has two nozzles for potting.
- Was filling mayonnaise.
- With pneumatic system.
- With panel.... |
|
|
 |
Brand: Mesal
Filling machine 10 nozzles for wax grease high viscosity.
Brand: Mesal.
Model: MEC 500/10.
Year: 2002.
Worked with domestic wax packaging.
With 10 nozzles, individual cylinder per nozzle.
With electric panel.
Production: 5,000 bo... |
|
|
| |
| |
|
